Argent Data Systems ADS-SR1 Benutzerhandbuch - Seite 12

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Wiederholer Argent Data Systems ADS-SR1 herunter. Argent Data Systems ADS-SR1 20 Seiten. Simplex repeater

Seite drucken

##18<time> - Repeater Cool-down Time

If the repeater times out due to a long transmission, it will stop repeating

transmissions until the period of time specified by this setting has expired. This

can be used to avoid transmitter overheating, to ensure that a repeater with a

stuck squelch remains controllable, or to penalize overly long-winded users. Set

to zero to disable. Default is disabled.

Example: ##1802 – Set cool-down time to 2 minutes

##165[n] – Enable 'Stand By' Tone or Message

The repeater will send the selected message (or a double beep if no

message is selected) when an incoming transmission is received. This alerts

other users that the repeater is in use. Because the repeater must key the

transmitter for the duration of the beep or message, the first portion of the

incoming transmission will be lost, so keep the 'stand by' message short. Default

is disabled.

Example: ##165 – Use 'stand by' beep

##164 – Disable 'Stand By' Message

Turns off the 'stand by' tone or message.

##78<code> - Set Pager Activation Code

The pager activation code can be up to 6 characters long. When a code is

entered, the repeater will ignore all received transmissions unless the DTMF

activation code is heard. This can be used to extend voice pager systems, or to

activate the repeater using a DTMF automatic numeric identification (ANI)

setting on the sending radio. Setting a blank code disables the function. Default

is disabled.

Example: ##781234 – Set pager activation code to '1234'.

##75<1/0> – Responder Mode On/Off

Enables or disables responder ('beepback') mode. When enabled, the

repeater will respond with a courtesy tone but will not automatically repeat

transmissions.

Example: ##751 – Enable responder mode.

##1651 – Use message '1'