Cisco Aironet 350 Series Schnellstart-Handbuch - Seite 9

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Drahtloser Zugangspunkt Cisco Aironet 350 Series herunter. Cisco Aironet 350 Series 16 Seiten. Managed switches
Auch für Cisco Aironet 350 Series: Schnellstart-Handbuch (12 seiten), Anmerkungen zur Veröffentlichung (14 seiten), Schnellstart-Handbuch (12 seiten), Schnellstart-Handbuch (12 seiten), Schnellstart-Handbuch (2 seiten), Handbuch (10 seiten), Kennenlernen (16 seiten), Schnellstart-Handbuch (5 seiten)

Determine Conﬁguration Method (continued)

Enter the bridge's MAC address in the Device MAC ID ﬁeld. The bridge's MAC address is

printed on the label on the bottom of the unit. It should contain six pairs of hexadecimal

digits. Your bridge's MAC address might look like the following example: 11223a4D5566.

Note

The MAC address ﬁeld is not case-sensitive.

In the IP Address ﬁeld, enter the IP address the network administrator gave you to assign

to the bridge. The IP address of the PC should be on the same subnet as the IP address you

are assigning to the bridge.

Enter the SSID you want to assign to the bridge in the SSID ﬁeld.

Note

You cannot set the SSID without also setting the IP address. However, you can set the

IP address without setting the SSID.

Click Set Parameters.

To test the IP address, open an Internet browser.

Enter the bridge's IP address in the browser's location or address ﬁeld. (If you are using

Netscape, the ﬁeld is labeled Netsite or Location; if you are using Microsoft Explorer, the

ﬁeld is labeled Address.)

Press Enter. The bridge's main menu page appears.