Cabela's 04202107 Benutzerhandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Küchengeräte Cabela's 04202107 herunter. Cabela's 04202107 12 Seiten. Manual meat tenderizer/cuber

Seite drucken

1. Cleaning and Maintenance

1. 11" x 9½" Large Hard-plastic Base

2. (2) Support Legs with (4) connecting Allen wrench hex bolts and washers

3. Tenderizer/Cuber Housing Assembly

WARNING! SHARP BLADES! Use caution when handling the housing assembly

DO NOT place fingers or hand into the top and bottom opening s of the housing assembly

in order to prevent injury. (It is recommended to wear steel mesh gloves when handling

housing with exposed blades)

4. Plastic Feed Chute with (2) top assembly Allen wrench hex bolts

5. (2) Blade Cleaning Combs (NOTE: An assembly thumbscrew is already be attached

to each comb with a c-clamp. Do not remove the thumbscrew from the comb)

6. Crank Handle Assembly with (1) threaded locking bolt

7. Meat Tongs

8. Large Allen Wrench for assembling legs to base and housing assembly and feed

chute to housing top

9. Small Allen Wrench for tightening blade shaft gear assembly

10. Table Mount C-clamps (2) to firmly hold unit in place during use

CAUTION: It is recommended to wear steel mesh or Kevlar®

cut-resistant gloves when handling the blade assembly

WARNING: CAREFULLY REMOVE HOUSING FROM THE STYROFOAM PACKING. CAUTION!

TENDERIZER/CUBER CUTTING BLADES ARE EXTERTREMELY SHARP! Handle the housing

assembly with care and DO NOT place hands or fingers into the housing openings in order to

prevent injury.

TENDERIZER/CUBER ASSEMBLY INSTRUCTIONS – cont.