ACU-RITE 01141 Gebrauchsanweisung - Seite 13

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Wetterstation ACU-RITE 01141 herunter. ACU-RITE 01141 20 Seiten. Professional weather center

Seite drucken

Programmable Alarms

This display features programmable alarms that sound an alert to notify you when a

value (for outdoor temperature, humidity, wind speed or rainfall) has been reached

or exceeded. When an alarm is triggered, the display emits an audible beep and

flashes data in the affected category.

or OFF the alarms you'd like activated or deactivated, and by inputting your own

values to trigger the alarm.

Setup an Alarm

1. Press and release the "

an alarm is shown on the display. "

2. Press and release the "

3. Press and release the "

the display.

4. Press and release the "

5. Press and release the "

will be shown on the display.

6. Press and release the "

buttons to adjust the alarm's LOW value.

7. Press and release the "

Disable an Alarm

1. Press and release the "

disable an alarm is shown on the display. "

2. Press and release the "

3. Press and release the "

4. Repeat steps 1-3, as needed.

NOTE: To disable ALL alarms at once, press and HOLD the "

You will automatically exit alarm SET MODE if no buttons are pressed for 10

seconds. Enter alarm SET MODE at any time by pressing the "

You can customize the alarms by turning ON

" button until the reading for which you wish to set

" will be shown.

" or "

" buttons until "

" button. The current HIGH alarm value flash on

" or "

" buttons to adjust the alarm's HIGH value.

" button. If applicable, the current LOW alarm value

" button and then press and release the "

" button to cycle to the next reading.

" button until the reading for which you wish to

" or "

" buttons until "

" button to cycle to the next reading.

" appears.

" will be shown.

" appears.

" button for 10 seconds.

" button.

" or "