Cisco AP-702W Handbuch für den Einsatz - Seite 23

Blättern Sie online oder laden Sie pdf Handbuch für den Einsatz für Drahtloser Zugangspunkt Cisco AP-702W herunter. Cisco AP-702W 27 Seiten. Aironet series

Seite drucken

Note

General Considerations Regarding APs

Following are some guidelines to remember regarding all APs.

If a connected wired client on the LAN port needs to send untagged packets out on the WAN

port, then VLAN must not be configured on that port.

To disable access VLAN on a particular LAN port:

config ap lan disable access vlan <port id> <AP-NAME> // port id (1 - 4)

On disabling access VLAN, vlan_valid in the lan_port info structure will be set to FLASE and

vlan_id will be set to 0. When VLAN is disabled on a port, it sends untagged packets towards

WAN and internal AP software.

To enable or disable a particular LAN port:

config ap lan port-id <port id> <enable/disable> <AP-NAME> // port id (1 - 4)

To display the configured values for a particular LAN port:

show ap lan <port id>

To display the configured values for all the LAN port:

show ap lan port-summary <AP-NAME>

Always try to mount the AP as close to the users as possible for best performance. Be aware of the

environment; for example, hospitals have metal doors and the coverage can change when the doors

close or old buildings can have metal grid work in the plaster or asbestos. Avoid mounting the AP

or antennas near metal objects because doing so can change the coverage area.

When using the 2.4 GHz frequency, the same 1, 6, and 11 channel scheme is used as is the 5 GHz

channel scheme. Avoid putting all the APs on the same channel, and reuse channels as you can. See

our other deployment guides for more on this topic.

<AP-NAME> // port id (1 - 4)

Cisco Aironet Series 702W Access Point Deployment Guide

General Considerations Regarding APs