Cisco ASA 5508-X Montieren und anschließen

Blättern Sie online oder laden Sie pdf Montieren und anschließen für Drahtloser Zugangspunkt Cisco ASA 5508-X herunter. Cisco ASA 5508-X 6 Seiten. Threat defense reimage guide
Auch für Cisco ASA 5508-X: Hardware-Installationshandbuch (32 seiten), Schnellstart-Handbuch (8 seiten), Handbuch zur einfachen Einrichtung (11 seiten), Schnellstart-Handbuch (9 seiten), Software-Handbuch (37 seiten), Handbuch (14 seiten)

Mount and Connect

This chapter describes how to rack-mount the ASA, and how to connect the cords and cables. It contains the

following sections

•

Rack-mount the ASA

The ASA ships with rack-mount brackets or "ears," which you can install on the front or the rear of the chassis.

Follow these steps to install your ASA in a rack.

Step 1

Attach both brackets to the sides of the ASA chassis, either to the front or rear.

After the brackets are secured to the chassis, you can mount it in the rack.

Step 2

Attach the chassis to the rack.

We recommend that you install the chassis with the rear panel facing the cold aisle. (See the following illustration for an

example of air flow from back to front.)

Rack-mount the ASA , on page 1

Connect Cables, Turn on Power, and Verify Connectivity, on page 2

Connect to a Console Terminal or PC, on page 4

Mount and Connect