Cisco Catalyst IW6300H-DCW Handbuch zur Installation

Blättern Sie online oder laden Sie pdf Handbuch zur Installation für Drahtloser Zugangspunkt Cisco Catalyst IW6300H-DCW herunter. Cisco Catalyst IW6300H-DCW 28 Seiten.

Seite drucken

Cisco Catalyst IW6300H-DCW Handbuch zur Installation

Installing the Access Point

This chapter describes how to install the access point.

•

Mounting on a Wall or a Pole

This section provides instructions for the physical installation of your access points. Personnel installing the

access point must understand wireless access points and bridging techniques and grounding methods.

Caution

All installation methods for mounting an access point on any wall surface is subject to the acceptance of local

jurisdiction.

Installation Option

The Cisco Catalyst IW6300 Heavy Duty Series Access Points are installed using the pole mount installation

kit (IOT-ACCPMK), which is used for pole or wall installations.

Warning

Only trained and qualified personnel should be allowed to install, replace, or service this equipment. Statement

1030

Warning

Installation of the equipment must comply with local and national electrical codes. Statement 1074

Refer to these sections for installation details:

Mounting on a Wall or a Pole, on page 1

Working with the Access Cover, on page 13

Installing External Antennas, on page 15

Grounding the Access Point , on page 19

Using the Reset Button, on page 20

Powering the Access Point, on page 20

Performing Maintenance, on page 27

Installing the Access Point