Cisco Explorer 4700 Benutzerhandbuch - Seite 11

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Drahtloser Zugangspunkt Cisco Explorer 4700 herunter. Cisco Explorer 4700 28 Seiten. Secure firewall management center
Auch für Cisco Explorer 4700: Schnellstart-Handbuch (2 seiten), Ersatz-Handbuch (16 seiten), Upgrade-Handbuch (24 seiten), Hardware-Installationshandbuch (46 seiten)

Seite drucken

Connecting the Set-Top

To connect your set-top to your entertainment devices, complete these steps.

Determine if your TV is HD or SD

and whether it is wide screen (16:9)

or standard screen (4:3). See page

11 for more information.

Make the connections for your TV and VCR as follows:

• If you are using an HDTV, see page 6 and the connection diagrams at the end of this guide.

• If you are using an SDTV, see page 7 and the connection diagrams at the end of this guide.

• If you want to archive some programs to VCR tape, see pages 6 and 7 and the connection

diagrams at the end of this guide.



Identify the additional devices you will

connect to the set-top and TV. See the

Connection Diagrams section

of this guide.

Plug the set-top and the TV into an AC power source that is not controlled by a switch.

POWER

Do not turn on the set-top or TV yet.

It may take several minutes for the set-top to receive the latest software, programming, and service

information. Wait until you see one of the following displays on the front panel of the set-top that

indicates that the update is complete:

• Current time

Note: If four dashes appear, you must call your service provider to get the set-top authorized.

Set up your set-top for HDTV or SDTV by completing the following steps:

• Make sure the set-top is Off and the TV is On.

• On the front panel of the set-top, press GUIDE and INFO at the same time. This will activate the

HD Setup Wizard.

• Follow the on-screen instructions to choose HD or SD mode and wide screen (16:9) or standard

screen (4:3) depending upon your TV type. See page 11 for more information on the scan rate.

• At the conclusion of the on-screen instructions, press POWER on the set-top to begin watching

TV.

DVD

Home Theater

• Four dashes (- - - -)

VCR

D-VCR

Other