Cisco Meraki Go GR60 Installationshandbuch - Seite 8
Blättern Sie online oder laden Sie pdf Installationshandbuch für Drahtloser Zugangspunkt Cisco Meraki Go GR60 herunter. Cisco Meraki Go GR60 12 Seiten.
Seite drucken
filled with workspaces divided by mid-height cubicle walls, installing on the ceiling or high on a wall would be ideal.
2. Power over Ethernet supports a maximum cable length of 300 ft (100 m).
3. If being used in a mesh deployment, the GR60 should have line of sight to at least two other Meraki devices. A
Cisco Partner can help ensure that your AP placement is ideal.
Install the GR60
For most mounting scenarios, the GR60 mount cradle provides a quick, simple, and flexible means of mounting your device. The installation should be done in
two steps. First, install the mount cradle to your selected location. Then, attach the GR60 to the mount cradle.
Mount the GR60
Attach the GR60 to the Mount Cradle
(This section applies to wall and/or solid ceiling, drop ceiling or electrical junction box mount
where you have already installed the mount cradle.)
The GR60 attaches to the mount cradle with two tabs on the cradle that insert into the GR60, and is secured to the cradle using one screw.
To attach the GR60 to the mount cradle properly, line up the top edge of the AP with the top tab of the mount cradle. Since the cradle is already mounted to the
wall, guide the GR60 towards the top tab and insert the top tab into the GR60's slot.
Then adjust the GR60 to guide the GR60's bottom slot into the cradle's bottom tab until it clicks into place. Once in place, the GR60 should be secured to the
cradle by using one of the included screws in the cradle's bottom tab.
8