Cisco VEN402 Kurzreferenz-Handbuch - Seite 2

Blättern Sie online oder laden Sie pdf Kurzreferenz-Handbuch für Drahtloser Zugangspunkt Cisco VEN402 herunter. Cisco VEN402 2 Seiten. Video bridge solution

Seite drucken
Welcome
With the VEN401 and VEN402 Video Bridge Solution, you can put a set-top, digital video recorder (DVR), or digital media adapter
(DMA) almost anywhere in the home.
Simply connect the VEN401 Access Point to your residential gateway or router to make Internet access available inside your
home. Then, connect the VEN402 Client device to your set-top, DVR, or DMA. Once you pair the devices, you don't need cables
or wall jacks to pass high-defi nition video streams from the Internet to your set-top or other media devices. Follow these simple
instructions to get connected now.
The consumer support website provides news and information about this product. For more information, please refer to
http://www.cisco.com/web/consumer/support/index.html
Front Panel
1
Wireless LED
1
2
Wi-Fi Protected Setup (WPS) button
2
3
3
Wi-Fi Protected Setup (WPS) LED
4
4
Ethernet LED
5
5
Power LED
T14853
Note: This illustration may vary from the actual product.
Back Panel
1 Ethernet Port
• Connects the VEN401 Access Point to a residential gateway or router
• Connects the VEN402 Client to a set-top, DVR, or DMA
2 Reset
Restores factory default settings when held for more than 5 seconds
Ethernet
3 Power
Connects device to the external 12 VDC power supply
1
2
Reset
Note: This illustration may vary from the actual product.
3
12VDC
T14854
Connecting the VEN401 Access Point to a Residential Gateway or Router
1. Connect the 12 VDC Power Supply plug to the wall power outlet. Use only the power adapter provided with this product.
2. Connect the power jack to the power port on the VEN401.
3. Connect one end of the RJ-45 Ethernet cable to the Ethernet port on the VEN401.
4. Connect the other end of the RJ-45 Ethernet cable to an available Ethernet port on your residential gateway or router.
Ethernet
Reset
12VDC
To Wall
Power Outlet
T14855
Connecting the VEN402 Client to a Set-Top, DVR, or DMA
1. Connect the 12 VDC Power Supply plug to the wall power outlet. Use only the power adapter provided with this product.
2. Connect the power jack to the power port on the VEN402.
3. Connect one end of the RJ-45 Ethernet cable to the Ethernet port on the VEN402.
4. Connect the other end of the RJ-45 Ethernet cable to an available Ethernet port on a set-top, DVR, or DMA.
Ethernet
RJ-45
Cable
Reset
12VDC
To Wall
Power Outlet
T14856
RJ-45
Cable
TEL 2
LAN 3
W/LAN 4
USB
ON
PSTN
DEVICE
POWER
HPNA
DSL
PC
RESET
OFF
TEL 1/2
LAN 1
LAN 2
To Network Jack
Pb
Y
L
R
TO TV
(VIDEO OUT)
OPTICAL
USB
POWER
Pr
VIDEO
AUDIO
S-VIDEO
NETWORK
OUT
OUT
To TV