Cisco WAP121 Schnellstart-Handbuch - Seite 10

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Drahtloser Zugangspunkt Cisco WAP121 herunter. Cisco WAP121 13 Seiten. Reboot and reset to factory default settings
Auch für Cisco WAP121: Überprüfung (6 seiten), Datenblatt (7 seiten), Broschüre & Specs (4 seiten), Schnellstart-Handbuch (13 seiten), Handbuch (4 seiten), Handbuch (4 seiten)

Seite drucken

Rebooting the Devices or Returning them

to their Factory Default Settings

To reboot your device:

• If your device uses a power adaptor, use the Power button to reboot

your device. The Power button only functions when the device uses a

power adaptor.

• Unplug your Ethernet connection for three seconds and plug it back in.

• If your devices uses PoE, with the power on, press the Reset button with

a bent paperclip for less than three seconds, or until the lights go off.

–

When all the lights go off, release the Reset button.

–

Release the Reset button as soon as the lights go off, or you will

restore the device to factory default settings and lose your

configurations.

To reset the device to factory default settings:

• To restore the device to the factory default settings, with the power on,

press-and-hold the Reset button with a bent paperclip for more than 10

seconds.

–

All of the lights will go off.

–

Release the Reset button when power light turns on.

Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE