Cisco WAP500 Series Schnellstart-Handbuch - Seite 2
Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Drahtloser Zugangspunkt Cisco WAP500 Series herunter. Cisco WAP500 Series 6 Seiten. Reboot and reset to factory default settings
Auch für Cisco WAP500 Series: Handbuch (4 seiten)
Seite drucken
or WAP571E Wireless Access Point.
Connect the WAP571E to the Network via PoE
Prepare the Cabling
Step 1. Disassemble the weather-proof connector to expose the red rubber gasket. After
disassembling, you should have the following:
1.
1 Thick rubber gasket
2.
Part B of the weather-proof connector
3.
Thin rubber gasket
4.
Part A of the weather-proof connector
Step 2. Slide the Ethernet cable through Part B of the weather-proof connector.
Step 3. Pinch the thick rubber gasket to reveal the cut and then slide the Ethernet cable through
the cut.