CABINETS TO GO Findley & Myers CBD36 Montageanleitung Handbuch - Seite 2
Blättern Sie online oder laden Sie pdf Montageanleitung Handbuch für Inneneinrichtung CABINETS TO GO Findley & Myers CBD36 herunter. CABINETS TO GO Findley & Myers CBD36 6 Seiten. Corner cabinets
Auch für CABINETS TO GO Findley & Myers CBD36: Montageanleitung (4 seiten)
Seite drucken►General Instructions:
Thank you for purchasing a Cabinets To Go product. You are now the proud owner of a high quality product designed
to face the test of daily use and guaranteeing your enjoyment for many years to come.
Carefully read the instructions before starting the installation.
During assembly, please follow all generally accepted safety procedures.
Failure to adhere to the following instructions will invalidate the warranty and Cabinets To Go will decline any responsibility for any
damages caused. Any installation which does not correspond to the instructions may result in defects, malfunctioning parts, significant
damage and/or injury.
Before the assembly begins, check that all appropriate and required plumbing and electrical connections exist.
Before drilling, make absolutely sure that there are no pipes (gas, water,electricity, heating, etc.) at the drilling location. Cabinets To Go will
not be held responsible for failure to follow these instructions.
PRIOR TO ASSEMBLY, PLEASE MAKE SURE YOU HAVE ONE FACE FRAME BOX AND ONE CARCASS BOX, WHICH HAVE ALL THE PARTS IN THE
QUANTITIES MENTIONED BELOW. IF YOU ARE MISSING ANY PARTS, PLEASE STOP AND CONTACT CUSTOMER CARE IMMEDIATELY AT 1-800-
CABINET.
► Items Quantity
Item
Description
Left Back Side Panel
A
Right Back Side Panel
B
Back Panel
C
D
Left Front Side Panel
E
Right Front Side Panel
F
Frame & Doors: (1 Lower Door, 1 False Drawer Front)
G
Toe Kick
H
Bottom Panel
Hardware Box
Bumper 2pcs, 1/2" Round Head Screws 8pcs, Metal 135° Brackets 4pcs
► Required tools:
Tools Required: Phillips Screwdriver
Optional Tools: Electric Drill
► Hardware Box:
a
b
c
4
2
Qty
t
8
Qty
Q
y
The materials listing above are for the largest unit in this instruction set. Smaller units may require less hardware and materials;
therefore, your item may contain a smaller number of each.
Optional Tools: Rubber Mallet
Page 2
Qty
1
1
1
1
1
1 Set
1
1