CABINETS TO GO Findley & Myers CBD42 Montageanleitung - Seite 3

Blättern Sie online oder laden Sie pdf Montageanleitung für Inneneinrichtung CABINETS TO GO Findley & Myers CBD42 herunter. CABINETS TO GO Findley & Myers CBD42 4 Seiten. Sink base corner

Seite drucken
Instructions:
►
1.
Place the face frame (A) face down on a flat soft working surface to ensure that the face is
not scratched or damaged. (Figure 1)
Installing the Side Panels: Insert left side panel (B1) and right side panel (B2) into the
2.
grooves of the face frame (A) and align the cam lock connectors. (Figure 2) Lock the cam locks with a
screwdriver by turning the screw 180° clockwise. (Figure 3)
3.
Installing the Bottom Panel: Gently spread the side panels and insert the bottom panel (C)
into the grooves of side panels (B1,B2) until it is fully seated into the groove of the face frame (A).
4.
Installing the Rear Side Panels (Figure 5): Insert rear left side panel (E1) and right side panel (E2)
into the grooves of the side panels (B1,B2) aligning side panels & bottom panel with rear side panels.
Lock each cam lock connector with a screwdriver by turning the screw. (Figure 3)
A
Figure 1
B2
B1
A
Figure 2
C
B1
A
Figure 4
E2
C
E1
A
B1
Figure 5
Page 3
Figure 3
B2
B2