Epson EcoTank ET-8500 Series Schnellstart-Handbuch
Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Alles in einem Drucker Epson EcoTank ET-8500 Series herunter. Epson EcoTank ET-8500 Series 4 Seiten.
Seite drucken
ET-8500/ET-8550
Start Here
IMPORTANT: Before using this product, make sure you read
these instructions and the safety instructions in the online User's
Guide.
The illustrations show the ET-8500, but the steps are the same
for the ET-8550, unless otherwise specified.
1
Unpack
Note:
• Do not open the ink bottles until you are ready to fill the ink tanks.
The ink bottles are vacuum packed to maintain reliability.
• The CD/DVD tray is on the bottom of paper cassette 2.
1
Remove all protective materials from the product.
2
Lift up the scanner unit and remove all protective
materials from inside the product.
Caution:
Do not touch the areas shown inside the product. The
printer ships with the transportation lock in the printing position.
Do not move it from the printing position.
ET-8550
3
Connect the power cord to the back of the product and to
an electrical outlet.
Caution:
Do not connect to your computer yet.
You can set up your product to print and scan wirelessly
from your mobile device or computer using the Epson
Smart Panel
app. To use the app, see "Setup from a
®
mobile device" on the back of this sheet. If you do not want
to use the app for setup, go to the next section.
2
Fill ink tanks
Warning:
Keep the ink bottles out of the reach of children and do not
drink the ink.
Caution:
This product requires careful handling of ink. If ink spills,
wipe it off immediately with a damp towel to avoid permanent stains.
If ink gets on your clothes or belongings, it may not come off.
Note:
• Epson cannot guarantee the quality or reliability of third-party ink.
• Use the ink bottles included with the printer to set up the product.
Part of the ink will be used to charge the print head. These bottles
may print fewer pages compared with replacement ink bottles.
• Epson strongly recommends the use of genuine ink to ensure
optimal print quality and performance.
1
Press the
power button to turn on the product.
Note:
If an error message appears, turn off the product and
check that no protective material has been left inside the product
and that the transportation lock is in the printing position.
2
Select your language on the LCD screen.
Note:
You can change this setting later using the product's
control panel. For more information, see the online User's Guide.
3
Open the ink tank cover, then open the cap for the
black (BK) ink tank.
Note:
Refer to the label above the ink tank to identify the color of
each tank.