Cisco 500 Series Handbuch - Seite 16

Blättern Sie online oder laden Sie pdf Handbuch für Konferenz-System Cisco 500 Series herunter. Cisco 500 Series 24 Seiten. Stackable managed switches
Auch für Cisco 500 Series: Handbuch mit Sicherheitsinformationen (42 seiten), Handbuch (4 seiten), Schnellstart-Quide (13 seiten), Schnellstart-Handbuch (21 seiten), Datenblatt (5 seiten), Benutzerhandbuch (4 seiten), Benutzerhandbuch (6 seiten), Benutzerhandbuch (46 seiten), Handbuch (40 seiten), Handbuch für die Verwaltung (48 seiten), Fehlersuche und Wartung (15 seiten), Kurzreferenz-Handbuch (7 seiten), Schnellstart-Handbuch (25 seiten)

Swap Headsets While on a Call

Procedure

Step 1

On your phone, press Applications

Step 2

Navigate Admin settings > Aux port.

Step 3

Select Connect e-hook headset to enable electronic hookswitch control.

Swap Headsets While on a Call

When you connect multiple headsets to the phone, you can switch among the headsets during a call by pressing

the Headset key on the phone. Though the phone is connected to multiple devices, you see a specific headset

is selected as the preferred audio device in the following priority order:

• When you connect only an analog headset to the phone, you make your analog headset the preferred

Procedure

Step 1

Before you make or answer a call, press Headset.

Step 2

(Optional) If you place a call, dial the number.

Troubleshoot Your Cisco Headset

Try the following basic troubleshooting steps if you have trouble with your Cisco headset.

• Restart your headset.

• Make sure that all cords are properly plugged in and functioning properly.

• Test a different headset with your device to determine if the problem is with your wireless headset or

• Make sure that your phone firmware is the latest release.

Confirm that Your Headset Is Registered

Procedure

Check to see if your headset is registered with the phone.

Step 1

Press Applications

Step 2

Navigate to Accessories. Select Show detail.

Accessories

audio device.

your device.

Accessories