Cisco 8865 Handbuch - Seite 17

Blättern Sie online oder laden Sie pdf Handbuch für Konferenz-System Cisco 8865 herunter. Cisco 8865 44 Seiten. Multiplatform phones
Auch für Cisco 8865: Eigenschaften (16 seiten), Benutzerhandbuch (24 seiten), Benutzerhandbuch (28 seiten), Firmware Migration Master Manual (31 seiten), Benutzerhandbuch (30 seiten), Benutzerhandbuch (23 seiten), Handbuch (43 seiten), Handbuch (14 seiten), Installationshandbuch (39 seiten), Handbuch zur Rekonfiguration (2 seiten), Schnellstart-Handbuch (2 seiten), Benutzerhandbuch (13 seiten), Schnellstart-Handbuch (2 seiten), Benutzerhandbuch (8 seiten), Handbuch (48 seiten), Handbuch (11 seiten), Benutzerhandbuch (40 seiten), Schnellstart-Handbuch (2 seiten), Schnellstart-Handbuch (2 seiten)

Your Phone

Sign Out of Your Extension from Another Phone

Procedure

Step 1

Press Applications

Step 2

Select Extension Mobility.

Step 3

Press Yes to sign out.

Sign into Extension Mobility with Your Cisco Headset

You can use Cisco Extension Mobility to sign in to a different phone in your network and have it act the same

as your phone. After you sign in, the phone adopts your user profile, including your phone lines, features,

established services, and web-based settings. Your administrator sets you up for the Cisco Extension Mobility

service.

You plug your Cisco Headset 500 Series or Cisco Headset 730 into someone else's phone. The headsets need

to use the USB or Y-cable to access this feature, or be paired and connected to the phone through the Cisco

Headset 560 Series Standard Base or Cisco Headset 560 Series Multibase. The Cisco Headset 730 needs to

connect to the phone with the USB cable. The Cisco Headset 730 USB dongle is not supported.

If your headset is not mapped to your user id, the first time you perform this procedure, phone may prompt

you to map the headset to your ID and the Cisco Unified Communications Manager maps the headset to your

user record. The prompt depends on configuration settings for the phone. When your headset is mapped to

you, the phone gets your user ID, based on the headset serial number, and displays your ID in the Extension

Mobility sign in screen.

Note

If the headset is upgrading or you're on a call, the association can't be made. Wait until the upgrade is finished

or the call is finished before you perform this procedure.

When you unplug the headset, you are signed out of Extension Mobility after a delay unless you confirm the

sign-out.

If you move your wireless headset too far from the phone, the phone signs you out of Extension Mobility

after a predetermined inactivity time.

You are also automatically signed out of Extension Mobility after a predetermined inactivity time.

Before you begin

A headset firmware upgrade can't be in progress.

The phone must be idle.

Procedure

Step 1

Plug your headset into the phone.

Sign Out of Your Extension from Another Phone

Your Phone