Cisco CTS-SX10-K9 Handbuch "Erste Schritte - Seite 9

Blättern Sie online oder laden Sie pdf Handbuch "Erste Schritte für Konferenz-System Cisco CTS-SX10-K9 herunter. Cisco CTS-SX10-K9 25 Seiten. Telepresence sx10 quick set

Seite drucken

Cisco TelePresence SX10 Quick Set

SX10 Quick Set

Provisioning set-up

(When using a provisioning system)

Start the Setup assistant

Navigate to the user name in the upper left corner, and select

Settings. Select

Setup assistant.

Navigate to Provisioning.

NOTE:

When you start up the SX10 for the first time, the Setup

assistant starts automatically.

Choose provisioning infrastructure

Choose one of the following supported provisioning systems:

•

Cisco VCS (Video Communication Server)

•

Cisco UCM (Unified Communications Manager)

Cisco VCS

Contact your VCS provider to get the information needed.

Have a look at the

Cisco VCS provisioning

information on VCS provisioning.

Cisco UCM

Contact your UCM provider to get the information needed.*

You can find more details about setting up Cisco UCM

provisioning in the

Administering TC endpoints on CUCM

guide

* The DHCP server can be set up to provide the External Manager address

automatically (DHCP Option 150). Any input set up here overrides the setting

provided by DHCP.

Back to task overview

D15117.01 SX10 Getting Started Guide TC7.1, MAY 2014.

Contents

Introduction

appendix for more

Configuration

CUCM

Enter IP address or DNS name, and select ⎷ to

confirm the change. Select

Apply

to save.

VCS

1. Enter IP address or DNS name of the Cisco

VCS and select ⎷ to confirm the change.

2. Enter the Username, and Password, if

required, for authenticating the video system

with the provisioning server. Select ⎷ to

confirm the change

3. Enter SIP

Domain

and select ⎷ to confirm the

change.

4. Select

Apply

to confirm the changes.

Getting Started Guide

Appendices

Contact