Cisco EX90 Benutzerhandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Konferenz-System Cisco EX90 herunter. Cisco EX90 7 Seiten. Telepresence system
Auch für Cisco EX90: Benutzerhandbuch (50 seiten), Kurzreferenz-Handbuch (2 seiten), Benutzerhandbuch (37 seiten), Benutzerhandbuch (49 seiten), Kurzreferenz-Handbuch (2 seiten), Handbuch "Erste Schritte (42 seiten), Benutzerhandbuch (45 seiten), Installationshandbuch (6 seiten), Kurzreferenz-Handbuch (2 seiten), Handbuch zur Fehlersuche (37 seiten), Installationshandbuch (2 seiten), Benutzerhandbuch (45 seiten), Benutzerhandbuch (37 seiten), Handbuch "Erste Schritte (46 seiten)

The Touch Panel

The system is controlled using the touch panel. To wake the system up, simply

touch the panel.

Do not disturb button. To change your status, tap the button and select

1 1

either Available or Do Not Disturb.

This section displays the system name or address.

Self-view button. This displays the local camera output. Before a call,

this will be displayed full screen. During a call a small picture-in-picture

window will appear.

Speaker button. This is used to select the audio output device - either the

main loudspeaker, the handset or headphones. (The headphone outlet is

located at the rear of the main unit.)

Microphone mute. Touch the button to mute and un-mute the

microphone. When muted, the button glows red.

Volume control. Either press the + and - buttons or slide your finger up

and down the panel to change the volume.

The camera has a built in privacy shutter. To operate the shutter, hold the outer

edge of the camera and rotate the ring.

To adjust the vertical alignment of the camera, simply tilt it up and down

manually.

The camera can also be used as a document

camera. To do this, simply tilt that camera into

the fully down position and place your

paperwork at the base of the unit. The camera

is automatically zoomed in and the self view is

displayed.

To access the on screen camera controls,

press the More button on the touch panel.

This displays the local camera controls and

brings up the self-view on screen

Press the + and - buttons to zoom the

camera in and out.

Press the focus button to auto-focus the

camera.

When finished press the Back button to

close the menu.