Argo CLIMIA CMK 4000 WiFi Betriebsanleitung - Seite 15

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Klimagerät Argo CLIMIA CMK 4000 WiFi herunter. Argo CLIMIA CMK 4000 WiFi 20 Seiten. Room air conditioner with remote condenser

Seite drucken

CLIMIA

If you are using an ANDROID device:

Tap on the adjacent symbol

(top of screen)

Select „Add to Home Screen"

Share...

Search on page

Add to home screen

WIFI NETWORK RESET

Press the control button of the unit for 5 seconds to reset the WiFi network access data, e.g. to connect to a new network or to

change the settings of the existing network. You will hear a beep and the WiFi status LED will start flashing.

Follow the instructions in the WiFi configuration section again.

CONFIGURATION ISSUES

Error messages: Some error messages may appear during the connection test. Possible Messages are shown below.

USN or PSW ERROR!!: This message may indicate that the username or password for the account you entered is already in use.

Therefore, it is not possible to create an account with these credentials. You will need to change your username and password

and create a new account.

NO WIFI CONNECTION: This message indicates that the connection to the selected WiFi network could not be established.

Possible causes are:

1. Wrong password.

2. Temporary failure of the specified WLAN.

3. Encryption type is not supported. The supported encryption types are listed below:

Open, WEP, WPA_PSK, WPA2_PSK, WPA_WPA2-PSK

WPA2_Enterprise is currently not supported.

NO SERVER FOUND: This message indicates that a connection to the server could not be established. Possible causes are:

1. Lack of Internet connection for the specified WLAN. There may be a problem with the router. Turn off the modem and restart it.

2. Temporary network disruption. Repeat the startup process in 30 minutes. If the problem persists, contact customer service.

The screen is displayed:

Enter a name.