Argo DAVEN PLUS Betriebsanleitung - Seite 4

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Klimagerät Argo DAVEN PLUS herunter. Argo DAVEN PLUS 20 Seiten.

• Before moving or cleaning the device, ensure that it is unplugged from

the socket.

• Do not move the air conditioner while it is operating; first turn the appliance

off, check for any condensate build-up and empty it if necessary.

• To turn the appliance off, set the remote control to OFF and remove the

plug from the socket. Pull on the plug only. Do not pull the cord.

• Do not use the appliance if the cord or plug are damaged. If the power

supply cord is damaged, it must be replaced by the manufacturer,

dealer or a similarly qualified person so as to avoid any safety risks.

• Keep the unit away from fire, possible fire sources, inflammable or

explosive objects.

• Do not leave the unit unattended while it's operating, turn the unit off

and unplug it.

• If drainage hose is used, the ambient temperature musnt't be lower than

0 °C. It can cause water leakage to the air conditioner.

• Do not splash or pour water on the air conditioner

PRECAUTION!

• Do not insert any objects into the air conditioner: this is very dangerous

as the fan turns at high speed.

• Ensure that air circulates freely around the unit. Do not cover the air

intake and delivery grilles with drapes or any other means.

WARNING!

• The air conditioner must be positioned at least 50 cm from the wall or

any other obstacles, on a flat and stable surface so as to avoid water

leaks.

• The air conditioner is fitted with a system for protecting the compressor

from overload. This means that the compressor only starts 3 minutes

after its previous stoppage.

• Please wait at least 3 minutes before starting the unit. This helps prevent

the compressor from being damaged.

WARNING!

• In the event of an anomaly, switch the appliance off and unplug it from

the socket. Do not dismantle or attempt to repair or modify the In the

V 04/23