DigiTech whammy ricochet Benutzerhandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Musik-Pedal DigiTech whammy ricochet herunter. DigiTech whammy ricochet 10 Seiten.

7. Range Switch

Selects whether the pitch of the incoming signal will be shifted up or down.

8. Trajectory LED Ladder

These LEDs light in sequential order to provide a visual indication of pitch shifting direction and

rate. For example, the LEDs will light from top to bottom when the incoming note is shifted down.

Conversely, the LEDs will light from bottom to top when the incoming note is shifted up. When the

effect is bypassed, these LEDs will cycle in the direction selected by the RANGE switch at 2 second

intervals.

9. Momentary Switch

Sets the operation of the Footswitch. When set to the "ON" position, the Whammy effect will only

be enabled as long as the Footswitch is held down. When set to the "OFF" position, the Whammy

effect will toggle between enabled and bypassed modes each time the Footswitch is pressed.

NOTE:

When the MOMENTARY switch is set to the "ON" position, the Whammy Ricochet will

use a buffered bypass signal path. When the MOMENTARY switch is set to the "OFF" position, the

Whammy Ricochet provides a hard-wired bypass signal path.

When the MOMENTARY switch is set to the "OFF" position and the pitch effect is turned on with

the Footswitch, setting the MOMENTARY switch to the "ON" position will make the effect always

be on and the Footswitch will now momentarily toggle the effect off. To restore having a bypassed

state when the Footswitch is not pressed for momentary operation, set the MOMENTARY switch

in the "OFF" position and use the Footswitch to bypass the effect before you set the MOMENTARY

switch back to the "ON" position.