Cisco TelePresence Video Systems
Contents
Provisioning set-up
(When using a provisioning system)
Start the Provisioning Wizard
Tap the user name in the upper left corner, and tap Settings.
Tap
Administrator > Provisioning
and then Start.
NOTE:
When you start up a MX or EX system for the first time,
the Provisioning Wizard starts automatically.
Choose provisioning infrastructure
Choose one of the following supported provisioning systems:
• Cisco VCS (Video Communication Server)
• WebEx Telepresence (Not available for SX10)
• Cisco UCM (Unified Communications Manager)
• Cisco UCM via Expressway
Tap
Next
to proceed.
Back to task overview
D14639.15 Video Systems Getting Started Guide TC7.2, OCTOBER 2014.
Introduction
User interfaces
Enter required parameters
Enter the parameters required for the chosen provisioning infrastructure. Then tap
Cisco VCS
Contact your VCS provider to get the IP address or DNS name
of the Cisco VCS
required, the
video system with the provisioning server.
Have a look at the
information on VCS provisioning.
WebEx TelePresence
Upon ordering the Cisco WebEx Telepresence service, you have
received a
Video number
Please contact your company's WebEx Telepresence adminis-
trator, if you do not have a video phone number and an activation
code.
Configuration
Configuration
(External
Manager), the SIP Domain, and, if
Username
and
Password
for authenticating the
Cisco VCS provisioning
appendix for more
and an
Activation
code.
13
Getting Started Guide
Appendices
Register
to complete the procedure.
Cisco UCM
Contact your UCM provider to get the IP address or DNS name
of the Cisco UCM
(External
Manager).*
You can find more details about setting up Cisco UCM provi-
sioning in the
Administering TC endpoints on CUCM
Cisco UCM via Expressway
Upon ordering this service, you have received a Username,
Domain
and Password. Enter those in the corresponding input
fields.
In some cases, you must manually enter the Expressway
address. Tick the
Manually override Expressway
enter the address you have received upon ordering in the
External Manager
field.
* The DHCP server can be set up to provide the External Manager address
automatically (DHCP Option 150). Any input set up here overrides the
setting provided by DHCP.
Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.
Contacts
guide
address, and
Seite drucken