Cisco TelePresence MX700 Handbuch - Seite 24

Blättern Sie online oder laden Sie pdf Handbuch für Konferenz-System Cisco TelePresence MX700 herunter. Cisco TelePresence MX700 45 Seiten. Single camera on a free standing floor stand or a floor stand secured to the wall
Auch für Cisco TelePresence MX700: Installationshandbuch (32 seiten), Schnellstart-Handbuch (12 seiten), Installationshandbuch (28 seiten), Installationshandbuch (29 seiten), Installationshandbuch (32 seiten), Kurzreferenz-Handbuch (2 seiten), Handbuch (45 seiten), Installationshandbuch (29 seiten), Kurzreferenz-Handbuch (2 seiten), Kurzreferenz-Handbuch (2 seiten), Handbuch "Erste Schritte (46 seiten)

Seite drucken

Button with custom text

Table of contents

Introduction

Example of use: Room presets for lighting, for example three buttons

Create a user interface

that show Dark, Cool, Bright.

API for in-room control

Events

Pressed

Widgets

Released

Command reference

Clicked

Troubleshooting

Tips and tricks

Examples

In-Room Control on Touch 10

for Cisco TelePresence

MX200 G2, MX300 G2,

MX700, MX800,

SX10, SX20, SX80

Collaboration Endpoint

software version CE8.2

Commands

D15358.02 - JULY 2016

www.cisco.com

Use the

interface. A value of

"inactive"

Text

inactive

active

Triggered when the button is pressed

Value: N/A

Triggered when the button is released

Value: N/A

Triggered when the button is released

Value: N/A

command to highlight or not the button in the user

SetValue

will highlight the button, and a value of

"active"

will release it.

Buttons with custom text come in different sizes. The size determines

the maximum number of characters you can add. Text does not wrap

to a new line. You cannot use the

text dynamically.

A button has two states: active and inactive. You do not have to set

the button in active state when someone taps it; the button can be

used to just send a signal without changing the button's visual state.

If you want to have the buttons linked so that only one can be

selected at a time (radio buttons), consider to use

Example:

Press and release the button with WidgetId = "button".

Terminal mode

*e UserInterface Extensions Event Pressed Signal: "button"

** end

*e UserInterface Extensions Event Released Signal: "button"

** end

*e UserInterface Extensions Event Clicked Signal: "button"

** end

<Event>

<WidgetId item="1">button</WidgetId>

<Type item="1">clicked</Type>

</Action>

</Widget>

</Extensions>

</UserInterface>

</Event>

Example:

Highlight the button with WidgetId = "button" (set it in

active state).

xCommand UserInterface Extensions Widget SetValue WidgetId: "button"

Value: "active"

command to change the

SetValue

Group

buttons.

XML mode