Cisco TelePresence MX700 Handbuch - Seite 24

Blättern Sie online oder laden Sie pdf Handbuch für Konferenz-System Cisco TelePresence MX700 herunter. Cisco TelePresence MX700 45 Seiten. Single camera on a free standing floor stand or a floor stand secured to the wall
Auch für Cisco TelePresence MX700: Installationshandbuch (32 seiten), Schnellstart-Handbuch (12 seiten), Installationshandbuch (28 seiten), Installationshandbuch (29 seiten), Installationshandbuch (32 seiten), Kurzreferenz-Handbuch (2 seiten), Handbuch (45 seiten), Installationshandbuch (29 seiten), Kurzreferenz-Handbuch (2 seiten), Kurzreferenz-Handbuch (2 seiten), Handbuch "Erste Schritte (46 seiten)

Seite drucken
Cisco TelePresence MX700 Handbuch
Button with custom text
Table of contents
Text
inactive
Introduction
Example of use: Room presets for lighting, for example three buttons that show
Create a user interface
Dark, Cool, Bright.
If you want to have the buttons linked so that only one can be selected at a time
(radio buttons), consider to use
API for in-room control
Events
Widgets
Widgets
Pressed
Command reference
Released
Troubleshooting
Clicked
Tips and tricks
Examples
Commands
Use the
D15358.01 APRIL 2016
A value of
Collaboration Endpoint software
version 8.1
release it.
© 2016 Cisco Systems, Inc.
All rights reserved.
Text
active
Group
buttons.
Triggered when the button is pressed
Value: N/A
Triggered when the button is released
Value: N/A
Triggered when the button is released
Value: N/A
command to highlight or not the button in the user interface.
SetValue
will highlight the button, and a value of
"active"
Buttons with custom text come in different sizes. The size determines the
maximum number of characters you can add. Text does not wrap to a new line.
You cannot use the
A button has two states: active and inactive. You do not have to set the button in
active state when someone taps it; the button can be used to just send a signal
without changing the button's visual state.
Example:
*e UserInterface Extensions Event Pressed Signal: "button"
** end
*e UserInterface Extensions Event Released Signal: "button"
** end
*e UserInterface Extensions Event Clicked Signal: "button"
** end
.
.
.
<Event>
<UserInterface item="1">
<Extensions item="1">
<Widget item="1">
</Widget>
</Extensions>
</UserInterface>
</Event>
Example:
xCommand UserInterface Extensions Widget SetValue WidgetId: "button"
will
"inactive"
Value: "active"
24
command to change the text dynamically.
SetValue
Press and release the button with WidgetId = "button".
Terminal mode
XML mode
<Action item="1">
<WidgetId item="1">button</WidgetId>
<Value item="1"></Value>
<Type item="1">clicked</Type>
</Action>
Highlight the button with WidgetId = "button" (set it in active state).