cable matters 103093 Benutzerhandbuch - Seite 8
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Extender cable matters 103093 herunter. cable matters 103093 12 Seiten. 1x2 hd audio/video extender and splitter
Seite drucken3.6 IR Remote Control
IR Transmitter Cable: Connect to the IR-T port on the Transmitter box. Requires line-of-sight with
the HDMI source equipment IR window. Tip: Shine a light on the source box to reveal the IR
window, if it is not labeled. Source equipment should be within 5 feet of the IR-T bulb. (Check your
HDMI source equipment documentation).
IR Receiver Cable: Connect to the IR-R port on the Receiver box. Requires line-of-sight with the
IR remote.
Note: RF and Bluetooth remotes are not compatible.
3.7 Troubleshooting Notes
Check that all connected equipment have power.
•
Check that both the Transmitter and Receiver have power. The green power LED on the
•
Transmitter and green LED of the Cat 6 port on the Receiver should be lit.
Check the LEDs on the Receiver's Ethernet port. A green LED indicates the receiver is powered.
•
An orange LED indicates data transfer.
Check that all cables are connected to the correct input and output ports. Secure the power cable
•
with the locking ring.
Directly connect the HDMI source equipment to each display to test for compatibility.
•
Test the Cat 6 cable with a network tester.
•
Try different EDID settings, test with only 1 display (local and extended).
•
Test with a different display for compatibility issues.
•
Check that the correct video input source and output display is selected.
•
Check the audio output settings from the source device or computer.
•
Try a lower resolution and/or refresh rate.
•
IR Transmitter (Blaster) Cable
www.cablematters.com
1x2 HD Audio/Video Extender and Splitter
IR Receiver Cable
6