cable matters 201078 Benutzerhandbuch - Seite 6
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Gehege cable matters 201078 herunter. cable matters 201078 12 Seiten. Usb 3.1 type-c gen 2 dual-bay external m.2 ngff sata enclosure
Seite drucken3.3 SSD Drive Storage Configuration Modes
1) Set the dip switches to the desired storage mode.
2) Connect the USB cable to the computer and turn on the enclosure.
3) Press the RESET button for 5 seconds or until the LED blinks to indicate a successful reset.
WARNING:
Use the screwdriver to
select the desired mode
JBOD/PM Mode=1down/2down (
independent storage. Configuration for 1 or 2 drives.
BIG/LARGE Mode=1up/2down
Configuration for 2 drives.
RAID 0 Mode=1up/2up
improve performance. Configuration for 2 drives.
Notes: Use identical SSD drives from the same manufacturer for the best result.
RAID 1 Mode=1down/2up
the same time for the highest reliability and redundancy. Configuration for 2 drives.
Notes: Use identical SSD drives from the same manufacturer for the best result.
3.4 Securing the Enclosure
1) Eject the Enclosure and turn it off before disconnecting the USB cable.
2) Slide the enclosure tray into the housing and secure with the included screws.
3) Stick on the included foot pads after formatting and testing the drives.
Pressing the RESET button will erase all data from the drive!
Disk striping interleaves different data across both drives to
Failure of 1 disk causes both disks to fail. Back-up critical data on separate disk.
If one disk fails, insert a replacement disk and wait while the data is copied.
www.cablematters.com
USB 3.1 Type-C™ M.2 SATA Dual-Bay Enclosure
Just a bunch of disks) Drives are operated as
Chains both drives together to operate as one drive.
Mirroring for fault tolerance. Writes data to both drives at
4
Press the RESET button for 5
seconds to set the storage mode