cable matters 201080 Benutzerhandbuch - Seite 5
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Gehege cable matters 201080 herunter. cable matters 201080 12 Seiten. Usb 3.1 type-c gen 2 dual-bay external sata ssd enclosure
Seite drucken3. DRIVE INSTALLATION & STORAGE CONFIGURATION
3.1 SATA SSD or HDD Drive Installation
Important Note!
or other grounding method. Place the enclosure tray on a clean, solid surface.
1) Check that the enclosure is turned OFF and not connected to the computer.
2) Carefully insert the SSD drives. The connectors are keyed to fit in one direction only.
3) Gently press down on the drives until they are flush with the side
mounting holes
4) Hold down the drive and secure the mounting screws with the
screwdriver.
3.2 SSD Drive Storage Configuration Modes
JBOD Mode=1down/2down (
independent storage. Configuration for 1 or 2 drives.
RAID 1 Mode=1up/2down
at the same time for the highest reliability and redundancy. Configuration for 2 drives.
Notes: Use identical SSD drives from the same manufacturer for the best result.
RAID 0 Mode=1down/2up
improve performance. Configuration for 2 drives.
Notes: Use identical SSD drives from the same manufacturer for the best result.
Handle drives carefully to avoid damage. Always use an anti-static wrist strap
If one disk fails, insert a replacement disk and wait while the data is copied.
If one disk fails, back-up the data and start over with a new disk.
Failure of 1 disk causes a loss of data on both disks. Always back-up critical
data on separate disk.
www.cablematters.com
USB 3.1 Type-C™ Dual-Bay SATA SSD Enclosure
Just a bunch of disks) Drives are operated as
Mirroring for fault tolerance. Writes data to both drives
Disk striping interleaves data across both drives to
3