Sony 1080i Betriebshandbuch - Seite 32

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Camcorder Sony 1080i herunter. Sony 1080i 40 Seiten. Digital camcorders: high definition camcorder
Auch für Sony 1080i: Betriebshandbuch (40 seiten)

Seite drucken

Troubleshooting

If you run into any problems using your

camcorder, use the following table to

troubleshoot the problem. If the problem

persists, disconnect the power source and

contact your Sony dealer.

Menu items are grayed out.

• There are some functions you cannot

activate simultaneously. For details, see

"Handycam Handbook" (PDF).

The power does not turn on.

• Attach a charged battery pack to the

camcorder (p. 9).

• Connect the plug of the AC Adaptor to

the wall outlet (p. 9).

• Set the camcorder onto the Handycam

Station securely (p. 9).

The camcorder does not operate

even when the power is set to on.

• It takes a few seconds for your

camcorder to be ready to shoot after the

power is turned on. This is not a

malfunction.

• Disconnect the AC Adaptor from the

wall outlet or remove the battery pack,

then reconnect it after about 1 minute.

If the functions still do not work, press

the RESET button (p. 19) using a

pointed object. (If you press the RESET

button, all settings, including the clock

setting, are reset.)

Buttons do not work.

• During Easy Handycam operation,

available buttons/functions are limited.

Cancel Easy Handycam operation. For

details on Easy Handycam operation,

refer to "Handycam Handbook" (PDF).

Your camcorder gets warm.

• This is because the power has been

turned on for a long time. This is not a

malfunction.

The power abruptly turns off.

• When approximately 5 minutes have

elapsed while you do not operate your

camcorder, the camcorder is

automatically turned off (A.SHUT

OFF). Change the setting of [A.SHUT

OFF], or turn on the power again, or

use the AC Adaptor.

• Charge the battery pack (p. 9).

Pressing START/STOP or PHOTO

does not record images.

• The playback screen is displayed. Set

the POWER switch to

(Still) (p. 14).

• Your camcorder is recording the image

you have just shot on the "Memory

Stick PRO Duo." You cannot make

new recording during this period.

• The "Memory Stick PRO Duo" is full.

Use a new "Memory Stick PRO Duo"

or format the "Memory Stick PRO

Duo." Or delete the unnecessary

images (p. 26).

• Total number of movie scenes or still

images exceeds the recordable capacity

of your camcorder. Delete the

unnecessary images (p. 26).

You cannot install "Picture Motion

Browser."

• Check the computer environment

required to install "Picture Motion

Browser."

• Install "Picture Motion Browser" in an

orderly manner (p. 29).

"Picture Motion Browser" does not

work correctly.

• Finish "Picture Motion Browser" and

restart your computer.

Your camcorder is not recognized by

the computer.

• Install "Picture Motion Browser"

(p. 29).

• Disconnect devices from the USB jack

of the computer other than the

keyboard, mouse, and your camcorder.

• Disconnect the USB cable from the

computer and the Handycam Station,

and restart the computer, then connect

the computer and your camcorder again

in an orderly manner (p. 30).

(Movie) or