Sony BVP-E10 Series Betriebshandbuch - Seite 11

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Camcorder Sony BVP-E10 Series herunter. Sony BVP-E10 Series 38 Seiten. Color video camera

Seite drucken

Front Panel

AUTO W/B BAL

WHT

SHUTTER

OFF

BLK

VTR START

SEL

MIC

LEVEL

gSHUTTER switch

hVTR START button

iLENS connector

jMIC connector

a VF (viewfinder) connector (20-pin)

Connect the 20-pin viewfinder cable of the BVF-10/10CE/

20W/20WCE viewfinder.

b Cable clamp

Secures a microphone cable and lens cable.

c Lens mount lever

Secures the lens to the lens mount.

For details, see "Attaching a Lens to the Camera".

d AUTO W/B BAL (automatic white balance/black

balance adjustment) switch

Adjusts the white balance and black balance

automatically.

WHT: The white balance is automatically adjusted.

When the WHITE BAL switch on the side of the

camera is set to A or B, the adjusted value is stored in

memory cell A or B.

BLK: The black balance is automatically adjusted. The

black set is simultaneously adjusted.

Note

The SHUTTER and AUTO W/B BAL switches do not

function when the camera is connected to a CCU, RCP, or

RM.

aVF connector

bCable clamp

cLens mount lever

dAUTO W/B BAL switch

eMENU SELECT knob

fMIC LEVEL control

e MENU SELECT knob

When the DISPLAY switch on the side panel is set to

MENU and the menu is displayed, turn this control to

select a menu item and press it to register the selection.

For details, see "Menu Operation".

f MIC LEVEL (microphone level) control

When a portable VTR is connected using the CCZ cable of

the CA-570/570P Camera Adaptor, the microphone level

can be adjusted by turning this control.

When the CA-570/570P Camera Adaptor is used and the

LEVEL/MIC switch on the rear panel of the camera

adaptor is set to FRONT/OFF, the sound volume of the

intercom can be adjusted using this control.

g SHUTTER switch

OFF: An electronic shutter does not function.

ON: An electronic shutter is activated.

SEL: The shutter speed and shutter mode change each

time the switch is set to this position.

h VTR START button

When a Camera Control Unit (CCU) is connected, the

audio signal of the intercom is sent to the CCU while this

button is held pressed.

When a VTR is connected using the CCZ cable of the

CA-570/570P, pressing this button starts recording, and

pressing it again stops recording. It is the same function as

with the VTR button on the lens.

i LENS connector (12-pin)

Connect a lens cable.

j MIC (microphone) connector (3-pin)

Connect a microphone cable.

Normally, connect the microphone supplied with the BVF-

10/10CE/20W/20WCE Viewfinder.

Phantom powering is turned off with the appropriate

internal switch setting.

For setting the switch, consult your Sony service

personnel.

Location and Function of Parts