Sony BVP-E30 series Betriebshandbuch - Seite 34
Blättern Sie online oder laden Sie pdf Betriebshandbuch für Camcorder Sony BVP-E30 series herunter. Sony BVP-E30 series 38 Seiten. Sdtv portable cameras
Auch für Sony BVP-E30 series: Betriebshandbuch (36 seiten), Broschüre & Specs (14 seiten), Handbuch (34 seiten)
Seite drucken
Appendices
Precautions
Note on laser beams
Laser beams may damage the CCDs. If you shoot a scene
that includes a laser beam, be careful not to let a laser beam
become directed into the lens of the camera.
Do not subject to severe shocks
Damage to the case or internal components may result.
When finished using
Set the power switch to OFF.
Operation and storage environment
Store in a level place with air conditioning.
If the unit gets wet, make sure it is completely dry before
storage.
Avoid use or storage in the following places:
• Extremely hot or cold places
• Places with high humidity
• Places with strong vibration
• Near strong magnetic fields
• In places where it receives much direct sunlight, or near
heating equipment
Condensation
If you move the camera from a very cold place to a warm
place, or use it in a damp location, condensation may form
on the lens or inside the camera.
The camera has no built-in condensation indicator. If you
find condensation on the body or lens, switch the camera
off and wait for the condensation to disappear for about
one hour.
Phenomena specific to CCD image
sensors
The following phenomena that may appear in images are
specific to CCD (Charge Coupled Device) image sensors.
They do not indicate malfunctions.
White flecks
Although the CCD image sensors are produced with high-
precision technologies, fine white flecks may be generated
on the screen in rare cases, caused by cosmic rays, etc.
This is related to the principle of CCD image sensors and
is not a malfunction.
34
Appendices
The white flecks especially tend to be seen in the following
cases:
• when operating at a high environmental temperature
• when you have raised the master gain (sensitivity)
• when operating in Slow-Shutter mode
This product has a compensation function and the problem
may be alleviated by automatic black balance adjustment
(see page 11).
Vertical smear
When an extremely bright object, such as a strong spotlight
or flashlight, is being shot, vertical tails may be produced
on the screen, or the image may be distorted.
Aliasing
When fine patterns, stripes, or lines are shot, they may
appear jagged or flicker.
Specifications
Pick-up device
Pick-up device
2/3-type, interline transfer CCD
Device configuration
RGB 3-CCD system
Picture elements BVP-E30/E30WS: 980 (h) × 988 (v)
BVP-E30P/E30WSP:
980 (h) × 1164 (v)
Optical specifications
Spectral system F1.4 prism system
Built-in filters
ND filters
1: Clear
2: 1/4 ND
3: 1/16 ND
4: 1/64 ND
Color temperature conversion filters
(BVP-E30/E30WS/E30WSP only)
A: Cross filter
B: 3200K (Clear)
C: 4300K
D: 6300K
General
Power requirements
12 V DC (10.7 to 17 V DC)
Power consumption
13 W
Operating temperature
–20°C to +45°C (–4°F to +113°F)
Storage temperature
–20°C to +60°C (–4°F to +140°F)
Mass
Approx. 2.4 kg (5 lb 5 oz) (not including
viewfinder)