Sony CVX-V3P Benutzerhandbuchr - Seite 28

Blättern Sie online oder laden Sie pdf Benutzerhandbuchr für Camcorder Sony CVX-V3P herunter. Sony CVX-V3P 46 Seiten. Color video camera
Auch für Sony CVX-V3P: Betriebsanleitung (2 seiten), Service-Handbuch (9 seiten)

Seite drucken
Sony CVX-V3P Benutzerhandbuchr
1-2.
INITIALIZATION OF F PAGE DATA
1. Initializing the F Page Data
Note: If the F page data has been initialized, "Modification of F
PAGE Data" and the camera system adjustments need to
be performed again.
Adjustment page
F
Adjustment Address
00 to FF
Initializing Method:
1)
Select page: 6, address: 02, and check that the data is "00".
2)
Select page: 0, address: 01, and set data: 01.
3)
Select page: 3, address: 00, set data: 2D (NTSC) or data: 2F
(PAL), and press the PAUSE button of the adjustment re-
mote commander.
4)
Select page: 3, address: 01, set data: 2D (NTSC) or data: 2F
(PAL), and press the PAUSE button of the adjustment re-
mote commander.
5)
Select page: 6, address: 02, and check that the data is "01".
6)
Select page: 3, address: 00, set data: 00, and press the PAUSE
button of the adjustment remote commander.
7)
Select page: 3, address: 01, set data: 00, and press the PAUSE
button of the adjustment remote commander.
8)
Select page: 0, address: 01, and set data: 00.
9)
Perform "Modification of F Page Data".
2. Modification of F PAGE Data
If the F PAGE data has been initialized, change the data of the
"Fixed data-2" address shown in the following tables by manual
input.
Modifying Method:
1)
Before changing the data, select page: 0, address: 01, and set
data: 01.
2)
New data for changing are not shown in the tables because
they are different in destination. When changing the data,
copy the data built in the same model.
Note: If copy the data built in the different model, the this unit
may not operate.
3)
When changing the data, press the PAUSE button of the ad-
justment remote commander each time when setting new data
to write the data in the non-volatile memory.
4)
Check that the data of adjustment addresses is the initial value.
If not, change the data to the initial value.
5)
After changing the data, select page: 0, address: 01, and set
data: 00.
3. F Page Table
Note: Fixed data-1 : Initialized data. ( Refer to "1. Initializing
the F Page Data".)
Fixed data-2 : Modified data. (Refer to "2. Modification of
F PAGE Data".)
Address
Initial
value
NTSC PAL
00 to 0F
10
11
12
13
14
15
16
17
18
19
1A
1B
1C
1D
1E
1F
20
21
22
23
24
25
26
27
28
29
2A
2B
2C
2D
2E
2F
30
18
18
31
3D
3D Reference Data Input
32
21
21
33
39
39
34
24
24
35
36
37
38
39
3A
3B
3C
3D
3E
5-6
Remark
Fixed data1
(Initialized data)
Fixed data2
Fixed data1
(Initialized data)
Fixed data2
Fixed data1
(Initialized data)
Fixed data2
Fixed data1
(Initialized data)
Fixed data2
Fixed data1
(Initialized data)
Auto White Balance
Fixed data1
(Initialized data)
Fixed data2
Fixed data1