Argo Husky Betriebsanleitung - Seite 7
Blättern Sie online oder laden Sie pdf Betriebsanleitung für Klimagerät Argo Husky herunter. Argo Husky 8 Seiten. Evaporative air cooler
HOW TO INSERT / REMOVE THE REMOTE CONTROL BATTERIES (refer to the diagram below)
Open the battery cover on the back of the remote control (press and pull the cover).
Place the battery inside the cover, making sure the polarity is correct.
Slot the cover back into position on the remote control.
Use Lithium/Manganese button cells, model no. CR2032 -3 V, compliant with Battery Directive no. 2006/66/EC (supplied
with the remote control).
.
TIRA
PREMI
Inserimento pila
INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EUROPEAN DIRECTIVE
2006/66/EC
Please replace the battery when its electrical charge has been exhausted: at the end of its useful life, it must not be disposed of
together with unsorted waste. It must be must be delivered to appropriate separated waste disposal plants or to dealers that
provide a similar service. Separate waste disposal of batteries prevents potential negative effects on the environment and human
health resulting from inadequate disposal, and also allows the materials from which it is made to be recovered and recycled in
order to achieve significant savings in terms of energy and resources. The separate disposal obligation is underlined by the
crossed-out dustbin symbol appearing on the battery. Illegal disposal of the product by the user shall result in the application of
administrative sanctions as defined by current regulations.
THE TANK MUST BE FILLED WITH WATER FOR THE APPLIANCE TO OPERATE IN
COOLER/HUMIDIFIER MODE.
Counter-rotate the tank knob by 90° and remove it from its slot; fill it with tap water, up to the maximum level mark. Reposition
the tank and turn the knob.
If you wish to keep the water in the tank below room temperature in order to maximise cooling in warmer months, leave one of
the two synthetic ice packs supplied in the freezer until solid, then add it to the water in the tank.
The ice will absorb heat from the water.
We recommend continuous use of the ice for optimal cooling capacity.
The first time it is used, you may detect a smell or the water may turn an unusual colour: this does
not consititute a health risk.
When the tank is removed when the unit is in function, the power goes off, it makes a beep and the
device stops working. Press the ON/SPEED button to restore the function. When the tank is empy for a few seconds the
cooling function stops and only the ventilation works. The LED will turn off
V 12/15
FILLING THE WATER TANK
water level
indicator
15