Cisco TelePresence VX Clinical Assistant Installations- und Benutzerhandbuch - Seite 24

Blättern Sie online oder laden Sie pdf Installations- und Benutzerhandbuch für Konferenz-System Cisco TelePresence VX Clinical Assistant herunter. Cisco TelePresence VX Clinical Assistant 33 Seiten. Mobile video system

Seite drucken

Using the System

• Turning the System On

• Making a Call

• System Interface

Turning the System On

When connected to AC outlet, simply turn ON the unit

with the power switch at the rear of the unit's BASE

and then press and hold the system's POWER BUTTON

on the POWER CONTROL AND BATTERY METER

PANEL for one second.

AC Power Switch

AC Power Input

When operating with the battery only, press and hold

the system's POWER BUTTON for one second on the

POWER CONTROL AND BATTERY METER PANEL.

NOTE: The switch at the unit's base toggles AC power

only. The battery will operate when it has a charge and

the system is not connected to AC power. The battery

will not charge unless the AC switch is on and plugged

in to an AC outlet.

141299.21 Cisco TelePresence VX Clinical Assistant

POWER BUTTON

This button turns the Power

Supply Module's outlets (and any

connected equipment) on and off.

To turn the Power Supply

Module's outlets ON: Press

and hold the "Power" button for

one second. The alarm will beep

once briefly after one second has

passed. Release the button. The

"Power" LED will illuminate. The

"Power" button will turn the outlets

on regardless of whether the

Power Supply Module is plugged

in or not.

To turn the Power Supply

Module's outlets OFF: Press

and hold the "Power" button for

one second. The alarm will beep

once briefly after one second has

passed. Release the button. The

"Power" LED will turn off.

MOBILE OPERATION (UNPLUGGED / DISCHARGING)

Unplug the Power Supply Module from the AC wall outlet.

Ensure that the cord is safely stowed aboard the cart to

reduce the risk of damage.

Use connected equipment between charges, depending

on battery conditions, environmental conditions and equip-

ment load. As the Battery Module's charge is depleted, the

Battery Charge LED Meter will indicate the approximate

charge level (see chart).

To turn the Power Supply Module's outlets (and any

connected equipment) OFF and stop the battery from

discharging, press the "Power" button for one second. The

alarm will beep once briefly after one second has passed.

Release the button. All LEDs will be OFF.

STATIONARY OPERATION (PLUGGED IN / CHARGING)

Plug the Power Supply Module into a live AC wall outlet.*

The Power Supply Module will deliver AC power to con-

nected equipment while simultaneously charging the

Battery Module.

Use connected equipment indefinitely as long as the

Power Supply is connected to a live AC outlet. If the

utility power fails, due to a blackout or severe brownout,

the Power Supply will automatically support connected

equipment with AC power from the Battery Module (if ad-

equately charged). When power resumes after a blackout,

the Power Supply will automatically resume supplying AC

power and recharging the Battery Module.

BATTERY CHARGE LED METER

POWER LED

This green LED

These LEDs will illuminate in several sequences

indicates whether

to indicate the approximate charge level of the

Battery Module. See "Operation" section for

the Power Supply

Module's outlets

charts illustrating Battery Charge LED Meter

Display depending on different charge levels while

are ON or OFF.

discharging and charging.

POWER CONTROL AND BATTERY METER PANEL

ALARM MUTE BUTTON

This button silences the Power

Supply Module's low battery

alarm. To silence the low battery

alarm, briefly press and release

the Alarm Mute button. The low

battery alarm will beep once

per second unless it is silenced.

Once the charge level falls below

30% (and shutdown is imminent)

the alarm will resume again after

one minute. Once the charge

level falls below 30%, the user

should save open files and safely

shut down connected equip-

ment immediately. If the cart is

unattended and PowerAlert Soft-

ware is loaded on a computer

connected to the Power Supply

Module, PowerAlert will auto-

matically save open files prior to

automatic shutdown.