Cisco 2600 Series Konfiguration - Seite 3

Blättern Sie online oder laden Sie pdf Konfiguration für Netzwerk-Hardware Cisco 2600 Series herunter. Cisco 2600 Series 15 Seiten. Configuring adsl wic to support pppoe clients
Auch für Cisco 2600 Series: Installationshandbuch (12 seiten), Anmerkungen zur Veröffentlichung (32 seiten), Anwendungshinweis (41 seiten), Datenblatt (6 seiten), Anhang (15 seiten), Installationshandbuch (22 seiten), Übersicht (13 seiten), Schnellstart-Handbuch (2 seiten), Handbuch (5 seiten)

Cisco 2600 Series Konfiguration

Purpose

Purpose of this document is to show how to use and configure Cisco 2600 Series
routers. Mainly this document has been done for Laboratory work course (S-38.133) at
Networking Laboratory at HUT. On laboratory course these Cisco's routers are used for
IPv4 routing in small network.
This document includes configuring interfaces up and routing part, which has manual
for RIP (Routing Information Protocol) and for OSPF (Open Shortest Path First). For
other routing protocols among others BGP (Border Gateway Protocol) see for example
1
Cisco's web site
.
Chapter 3 is suited very good for example for PC routers running Zebra
3
Quagga
) as routing daemon, because it has same commands as Cisco routers use.
Mainly this document is collection of Cisco's manuals ([1] – [2], [6] – [7]), which are
modified for our laboratory course's use.
1
www.cisco.com
2
www.zebra.org
3
www.quagga.net
3
2
(nowadays