Cisco 2600 Series Anhang - Seite 3

Blättern Sie online oder laden Sie pdf Anhang für Netzwerk-Hardware Cisco 2600 Series herunter. Cisco 2600 Series 15 Seiten. Configuring adsl wic to support pppoe clients
Auch für Cisco 2600 Series: Installationshandbuch (12 seiten), Anmerkungen zur Veröffentlichung (32 seiten), Konfiguration (15 seiten), Anwendungshinweis (41 seiten), Datenblatt (6 seiten), Installationshandbuch (22 seiten), Übersicht (13 seiten), Schnellstart-Handbuch (2 seiten), Handbuch (5 seiten)

Cisco 2600 Series Anhang
Caller ID on Cisco 2600 and 3600 Series Routers and Cisco MC3810 Multiservice Concentrators
Table 56
User
Originating
Call
A
D
D
B
B
B
E
F
C
D
C
C

Call Time Display

When caller-ID information is sent, the local time set on the router is transmitted with the station name
and number. If a call received on an FXO port is terminated on an FXS port, the calling time received
on the FXO port is replaced by the local time while transmitting caller ID to the FXS port. This is also
true for calls received from the network. The router should be configured to retrieve network time at boot
up from an NTP server in order to maintain the correct local time setting.
For more information about voice configuration, refer to the following:
The following online feature documentation and installation guides describe the configuration and
installation of hardware components:
Caller-ID Information Received
User
Receiving
Call
Caller-ID Information Received
D
D receives the caller ID of the PSTN subscriber line only (408 555-1111).
A
A receives the calling number and name of D, provided that the PSTN
subscriber line (408 555-1111) is enabled for Caller ID.
B
B receives the calling number and name of D, provided that the PSTN
subscriber line (408 555-1111) is enabled for Caller ID.
D
D receives the caller ID of the PSTN subscriber line only (408 555-2222).
E
E receives the Calling Number and Name string of B.
G
G receives the Calling Number and Name string of B.
B
B receives the Calling Number and Name string of E.
C
C receives the Calling Number of F.
F
Calling Number of C.
C
C Receives Calling Number of D through ANI.
D
Calling Number of C goes through ANI to the PSTN. However, the PSTN
displays only the trunk ID, so D sees only this information.
F
The information that F receives depends on the PBX features available.
Cisco IOS IP Routing Configuration Guide
Cisco IOS Wide-Area Networking Configuration Guide
For information about installing Cisco MC3810 multiservice concentrators, see Cisco MC3810
Multiservice Concentrator Hardware Installation at the following location:
http://www.cisco.com/univercd/cc/td/doc/product/access/multicon/3810hwig/index.htm
For information about installing Cisco 2600 series routers, see the documents listed at the following
location: http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/cis2600/index.htm
For information about installing Cisco 3600 series routers, see the documents listed at the following
location: http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/cis3600/index.htm
Cisco IOS Voice, Video, and Fax Configuration Guide
Caller ID Overview
VC-813