ACU-RITE Iris 06103M Einrichtung

Blättern Sie online oder laden Sie pdf Einrichtung für Monitor ACU-RITE Iris 06103M herunter. ACU-RITE Iris 06103M 2 Seiten.

Seite drucken

SETUP REQUIRES:

• Display

• Power Adapter (3 AAA backup batteries recommended)

• AcuRite Iris (5-in-1) Sensor (may be sold separately)

PLUG IN DISPLAY AND CONFIGURE SETTINGS

Plug in the power adapter. Once the display is powered on, configuration will begin automatically. Use the

Down buttons to select between options, and press the set button to confirm your selections.

and

• 12 or 24 Hour Clock Display

• Calendar Year

• Clock Hour

• Temperature Units (°F / °C)

• Clock Minute

• Wind Speed Units

• Calendar Month

(mph, km/h, knots)

• Calendar Date

You can configure these settings at any time by pressing the set button.

INSTALL SENSOR BATTERIES

In the outdoor sensor battery compartment, install four AA alkaline or lithium batteries. The display should

automatically sync with the sensor and start showing readings within a minute.

NOTE: In the battery compartment of the sensor, there is a small A-B-C switch that should match the selection on

the Display, located in the battery compartment. By default, the selection is "A" and shouldn't need adjustment.

MOUNT SENSOR

Find a suitable place to mount the outdoor sensor:

• At least 5 feet (1.5 meters) off the ground

• Front solar cell facing south

• Away from heat and humidity sources

• Level for accurate rain reporting using bubble level

on top of sensor

Once the sensor is mounted, remove the rain gauge

stabilizer from sensor.

• Rainfall Units

(inches / mm)

• Pressure Units

(inHg / hPa)

A B C

A-B-C Switch

Set to match

display

Rain Gauge Stabilizer

Install Batteries

Remove and discard

4 AA Batteries

Set up your AcuRite Iris

Use Wi-Fi to Connect to My AcuRite

SETUP REQUIRES:

• Display and AcuRite Iris Sensor

• 2.4 GHz Wireless Network

• Phone, Tablet, or Computer with Wi-Fi

CONNECT TO DISPLAY WI-FI

Connect to the Wi-Fi signal coming from your

Display using your phone or Wi-Fi compatible

device.

ACCESS WI-FI SETUP PAGE

Open a web browser on your device. Type

"192.168.4.1" in the address bar and hit enter to

access the AcuRite Wi-Fi display settings website.

ADDITIONAL NOTES

The Wi-Fi set up page is available for 30 minutes after the display is powered on. Press the set button to

reactivate the setup page at any time.

To retain Wi-Fi configuration details, backup batteries in the display are strongly recommended. The display can

be power cycled at any time to clear Wi-Fi credentials.

Display 06103M

Records Button

for Remote Monitoring

ADD YOUR WI-FI CREDENTIALS

Select your Wi-Fi network name and enter your

network password. Press "Save". Once your

credentials are successfully entered, reconnect to

your normal Wi-Fi.

SET UP YOUR MY ACURITE ACCOUNT

Download the My AcuRite mobile app or visit

www.myacurite.com to complete setup. You will

need the device ID located on the back of the

display or inside the battery compartment.