Cisco 3110 Erste Schritte - Seite 39

Blättern Sie online oder laden Sie pdf Erste Schritte für Netzwerk-Hardware Cisco 3110 herunter. Cisco 3110 42 Seiten.
Auch für Cisco 3110: Handbuch (42 seiten)

Seite drucken

Getting Started

Inside, Outside Network Connections

The graphic indicates which port is connected to the outside (or upstream) and inside networks, under the

following conditions.

• Inside Network—The port for the inside network is shown for the interface named "inside" only. If there

• Outside Network—The port for the outside network is shown for the interface named "outside" only.

Management Setting Status

The graphic shows whether the gateway, DNS servers, NTP servers, and Smart Licensing are configured for

the management address, and whether those settings are functioning correctly.

Green indicates that the feature is configured and functioning correctly, gray indicates that it is not configured

or not functioning correctly. For example, the DNS box is gray if the servers cannot be reached. Mouse over

the elements to see more information.

If you find problems, correct them as follows:

• Management port and gateway—Select System Settings > Management Interface.

• DNS servers—Select System Settings > DNS Server.

• NTP servers—Select System Settings > NTP. Also see

• Smart License—Click the View Configuration link in the Smart License group.

Viewing System Task Status

System tasks include actions that occur without your direct involvement, such as retrieving and applying

various database updates. You can view a list of these tasks and their status to verify that these system tasks

are completing successfully.

The task list shows consolidated status for system tasks and deployment jobs. The audit log contains more

detailed information, and is available under Device > Device Administration > Audit Log. For example,

the audit log shows separate events for task start and task end, whereas the task list merges those events into

a single entry. In addition, the audit log entry for a deployment includes detailed information about the deployed

changes.

Procedure

Step 1

Click the Task List button in the main menu.

The task list opens, displaying the status and details of system tasks.

Step 2

Evaluate the task status.

are additional inside networks, they are not shown. If you do not name any interface "inside," no port is

marked as the inside port.

As with the inside network, this name is required, or no port is marked as the outside port.

Viewing System Task Status

Troubleshooting

NTP.

Getting Started