Argo CLOVER Betriebsanleitung - Seite 10

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Heizgerät Argo CLOVER herunter. Argo CLOVER 12 Seiten. Wall-mounted ceramic fan heater

INFORMATION FOR THE CORRECT DISPOSAL OF BATTERIES IN ACCORDANCE WITH EUROPEAN

DIRECTIVE 2006/66/EC AND CHANGES INTRODUCED BY DIRECTIVE 2013/56/EU

Replace batteries when they are depleted. At the end of their life, batteries must be disposed of separately

from unsorted waste. They must be taken to designated recycling centres or returned to a retailer providing

this service. Separate disposal of batteries prevents potential negative effects on the environment and human

health due to inadequate disposal, and also allows their constituent materials to be recovered and recycled,

resulting in significant savings in terms of energy and resources. In order to highlight the obligation regarding

separate disposal, the battery carries the crossed-out dustbin symbol. Illegal disposal of the product by the

user may lead to administrative sanctions being applied as per current regulations.

In the event of overheating, the protection system of the appliance will automatically disable the heating elements and

the motor, thus causing the fan heater to stop working.

In this case:

•

turn the fan heater off;

•

remove the causes of the overheating (e.g. obstacles in front of the air input/output grilles, dust build-up inside

the appliance, etc.);

•

leave the appliance to cool down for 15-20 minutes;

•

turn the fan heater on again and check that it works properly.

If the malfunction persists, contact an Authorised Service Centre.

CAUTION: ALWAYS UNPLUG THE APPLIANCE BEFORE CLEANING OR PERFORMING ANY MAINTENANCE.

IMPORTANT: DO NOT SUBMERGE THE FAN HEATER IN WATER.

Cleaning the outside surface of the appliance

Switch off the appliance and unplug it before cleaning or moving the appliance. Use a soft cloth to remove any dust

from the product. If this is not enough, use a soft cloth dampened with water and neutral detergent at a temperature

below 50 °C. Leave the appliance to dry thoroughly before using it again. Do not use corrosive detergents or solvents

such as petrol. Do not wash the appliance with water. When cleaning the appliance, do not use oils, chemical

substances or other items that may damage the surface. Use a vacuum cleaner to remove dust from the air inlet/outlet

grilles.

STORAGE

If the appliance is not used for prolonged periods, it must be stored together with this manual in its original packaging,

in a cool and dry place.

V 07/22

OVERHEATING SAFETY DEVICE