Cisco 7609 Installation von - Seite 3
Blättern Sie online oder laden Sie pdf Installation von für Netzwerk-Hardware Cisco 7609 herunter. Cisco 7609 22 Seiten. Internet router
Auch für Cisco 7609: Broschüre (8 seiten), Datenblatt (5 seiten), Häufig gestellte Fragen (5 seiten), Benutzerhandbuch (28 seiten)
Seite drucken
Chapter 3
Installing the Cisco 7609 Internet Router
Installing the Rack-Mount Kit
Rack-Mounting Guidelines
OL-5079-04
This section describes how to install the rack-mount kit provided in the
accessories box. The kit contains a shelf bracket and crossbar assembly that
attaches directly to the rack and L brackets that attach to the chassis.
Open the rack-mount kit and use the checklist in
are included.
Table 3-1
Rack-Mount Kit Checklist
Part Description
L brackets
M3 Phillips countersunk-head screws
M4 Phillips countersunk-head screws
12-24 x 3/4-inch Phillips binder-head screws
10-32 x 3/4-inch Phillips binder-head screws
Shelf brackets
Crossbar bracket
M3 Phillips pan-head screws
Before rack-mounting the Cisco 7609 Internet Router, ensure that the equipment
rack complies with the following guidelines:
The width of the rack, measured between the two front mounting strips or
•
rails, must be 17.75 inches (45.09 cm).
The depth of the rack, measured between the front and rear mounting strips,
•
must be at least 19.25 inches (48.9 cm) but not more than 32 inches
(81.3 cm).
The rack must have sufficient vertical clearance to insert the chassis. The
•
chassis height for the Cisco 7609 Internet Router is 33.5 inches (85.1 cm)
(20 RU).
Installing the Rack-Mount Kit
Table 3-1
Received
Cisco 7609 Internet Router Installation Guide
to verify that all parts
3-3