Sony Power HADFX HDC-P1 Betriebshandbuch - Seite 13
Blättern Sie online oder laden Sie pdf Betriebshandbuch für Digitalkamera Sony Power HADFX HDC-P1 herunter. Sony Power HADFX HDC-P1 36 Seiten. Hd multi purpose camera
Auch für Sony Power HADFX HDC-P1: Broschüre (36 seiten), Broschüre (4 seiten), Broschüre (4 seiten), Broschüre (2 seiten)
Seite drucken
2
Configure settings related to TCP/IP.
For details, see "TCP/IP SETTING (MAINTENANCE
menu)" (page 13).
3
Set the LAN connection.
For details, see "LAN SETTINGS (MAINTENANCE
menu)" (page 13).
4
Set the IP address of the camera for "target IP
address" of the MSU or RCP to be connected to the
LAN.
For details, see the operation manual of the MSU or RCP.
Note
The BRIDGE mode does not support a multiple-camera
system.
To connect in MCS mode
In MCS mode, one MSU that can be called the master is
required.
If there are multiple MSUs, set one of them to "master," and the
others to "client."
1
Set CNS MODE to MCS.
For details, see "CNS SETTINGS (MAINTENANCE
menu)" (page 14).
2
Set CCU NO.
For details, see "CNS SETTINGS (MAINTENANCE
menu)" (page 14).
3
Set MASTER IP ADDRESS.
For details, see "CNS SETTINGS (MAINTENANCE
menu)" (page 14).
4
Configure settings related to TCP/IP.
For details, see "TCP/IP SETTING (MAINTENANCE
menu)" (page 13).
5
Set the LAN connection.
For details, see "LAN SETTINGS (MAINTENANCE
menu)" (page 13).
6
Configure the settings of the MSU or RCP to be
connect by LAN.
For details, see the operation manual of the MSU or RCP.
Notes
• When connecting the RCP to the camera with a CCA-5
cable, and using a LAN cable for the connection device of
that RCP, set CNS MODE to the LEGACY mode.
• When connecting the RCP to the camera with a LAN cable,
and using a CCA cable for the connection device of that
RCP, set CNS MODE to the MCS mode.
• Set CCU NO to a number that is not a duplicate of any of the
CCU device numbers in the system.
About the menu to configure the control
system connection settings
For details on menu operations, see "Menus" (page 16).
TCP/IP SETTING (MAINTENANCE menu)
<TCP/IP SETTING>
IP ADDRESS:
0.
SUBNET MASK:
0.
DEFAULT GATEWAY:
0.
IP ADDRESS: Set the IP address to assign to the camera.
SUBNET MASK: Set the subnet mask of the network
environment.
DEFAULT GATEWAY: Set the default gateway of the network
environment if necessary.
LAN SETTINGS (MAINTENANCE menu)
<LAN SETTINGS>
AUTO NEGOTIATION
CONNECTION SPEED
DUPLEX MODE
AUTO MDI/MDIX
MDI/MDIX
AUTO NEGOTIATION: The LAN interface of the camera
supports Auto Negotiation. If the connected device
supports Auto Negotiation, setting this to ON will
automatically set the connection speed (SPEED) and
communication system (DUPLEX) in accordance with the
connected device. If the connected device does not
support Auto Negotiation, set this to OFF.
CONNECTION SPEED: Set the connection speed of the LAN
line. If AUTO NEGOTIATION is set to OFF, set this
manually (10M or 100M) in accordance with the connected
device.
DUPLEX MODE: Set the communication system of the LAN
line. If AUTO NEGOTIATION is set to OFF, set this
manually (half duplex: HALF or full duplex: FULL) in
accordance with the connected device.
AUTO MDI/MDIX: Set the automatic setting function for the
polarity of the connector of the LAN cable to be connected.
This setting is only enabled when AUTO NEGOTIATION is
set to ON.
MDI/MDIX: Set the polarity of the connector of the LAN cable
to be connected. When AUTO NEGOTIATION or AUTO
MDI/MDIX is set to OFF, manually set the polarity (MDI or
MDIX) in accordance with the connected device and cable.
M15 TOP
0.
0.
0
0.
0.
0
0.
0.
0
SET
M16 TOP
:
ON
: 100M
: FULL
: ON
: MDI
SET
Preparatory Settings
13