Cisco Aironet 340 Series Schnellstart-Handbuch - Seite 10

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Netzwerk-Hardware Cisco Aironet 340 Series herunter. Cisco Aironet 340 Series 16 Seiten. Usb client adapter
Auch für Cisco Aironet 340 Series: Schnellstart-Handbuch (12 seiten), Schnellstart-Handbuch (13 seiten), Anmerkungen zur Veröffentlichung (14 seiten), Schnellstart-Handbuch (12 seiten), Schnellstart-Handbuch (12 seiten)

Conﬁgure the Bridge

After you choose an initial conﬁguration for the bridge, you can choose to access the bridge's

management system through your Internet browser or through a Telnet session. Each method

is described below.

Using an Internet Browser

Follow these steps to conﬁgure the bridge with an Internet browser:

Open an Internet browser.

Enter the bridge's IP address in the browser's location ﬁeld. (If you are using Netscape, the

ﬁeld is labeled Netsite or Location; if you are using Microsoft Explorer, the ﬁeld is labeled

Address.) Press Enter.

When the bridge's management home page appears, click Allow Conﬁg Changes in the

upper-left corner.

In the Conﬁguration menu, click Radio.

Caution

SSID in the next step could interrupt connectivity to the device. Be sure to enter an SSID

that matches the SSID of an access point near the bridge.

On the Radio page, look at the SSID in the Service set identiﬁer ﬁeld. If it is tsunami, the

default setting, delete it and enter the SSID provided by your network administrator. Click

Save.

If you already set the SSID using IPSU and the SSID in the Service set identiﬁer ﬁeld is

correct, you do not need to set it again.

Note

Steps 6 through 15 help you set the bridge's WEP key. If your wireless network does not

use WEP, skip to Step 16.

In the Item column on the Radio page, click Privacy conﬁguration.

In the Privacy conﬁguration menu, click Set the keys.

Click inside the box labeled Enter a key number from 1 to 4.

If you are conﬁguring the bridge through a wireless connection, changing the