Sony SX90 Technisches Handbuch - Seite 4

Blättern Sie online oder laden Sie pdf Technisches Handbuch für Digitalkamera Sony SX90 herunter. Sony SX90 39 Seiten. Digital camera module

System Components

The camera module imaging system comprises the following products.

Products 1 to 4 are used for the basic configuration, and 1 to 7 for the optional configuration. (All the products

except the camera module are available separately.)

1 Camera module

This is a small-size, high-resolution, camera

module using a CCD image sensor.

2 IEEE1394b camera cable (commercially

available)

Connect this cable to the IEEE1394b connector on

the rear panel of the camera module. The power and

image/control signals are transmitted through this

cable. To prevent a poor connection or damage to

the camera or cable, use the cable equipped with

fixing screws.

3 C-mount lens (commercially available)

Use an appropriate lens for the camera module and

usage.

4 Camera module interface board (commercially

available)

Install the board in a PCI bus slot of a host device

such as a PC.

Select an IEEE1394 interface board to match your

system.

Select an IEEE1394b interface board if you use the

transfer speed of 800 Mbps.

5 VCT-ST70I tripod adaptor (Sony)

Attach this adaptor to the bottom of the camera

module to fix the camera module to a tripod.

6 DC-700/700CE camera adaptor (Sony)

7 CCXC-12P02N (2 m, 6.6 ft)/05N (5 m, 16.4 ft)/

Connect this adaptor to the camera module to

enable power supply from an ordinary AC power

source.

10N (10 m, 32.8 ft)/25N (25 m, 82 ft) camera

cable (Sony)

Connect this cable to the 12-pin I/O connector on

the rear panel of the camera module. The cable is

used for power supply and exchange of trigger

signals.