Sony XC-ST50 Handbuch - Seite 2

Blättern Sie online oder laden Sie pdf Handbuch für Digitalkamera Sony XC-ST50 herunter. Sony XC-ST50 4 Seiten. Black-and-white video camera module
Auch für Sony XC-ST50: Spezifikationen (4 seiten), Benutzerhandbuch (31 seiten), Produkthandbuch (2 seiten), Technisches Handbuch (30 seiten), Technisches Handbuch (31 seiten)

Seite drucken

•

XC-ST50/XC-ST51/XC-ST30

(Typical Values)

Relative sensitivity

1.0

0.8

0.6

0.4

0.2

400

500

600

Wavelength (nm)

(Lens characteristics and light source characteristics excluded.)

Speciﬁ cations

XC-ST70

Image device

2/3-type IT CCD

Signal system

Effective picture elements (H) × (V)

Effective lines (H) × (V)

Cell size (H) × (V)

11.6 μ m × 13.5 μ m

Horizontal frequency

Vertical frequency

Lens mount

Sync system

External Sync system input/output

External Sync frequency

Jitter

Scanning system

Video output

Horizontal resolution

Sensitivity

Minimum illumination

S/N ratio

Gain

Gamma

Normal shutter

External trigger shutter

Power requirements

Power consumption

Dimensions

Mass

Operating temperature/humidity

Storage temperature/humidity

Performance guarantee temperature

Vibration resistance

Shock resistance

MTBF

Regulatory compliance

Supplied accessories

The values for mass and dimension are approximate.

Automatic switching in response to the presence of an input signal when the switch on the rear panel is set to EXT.

700

800

900

1000

XC-ST50

XC-ST51

1/2-type IT CCD

EIA

768 × 494

752 × 485

8.4 μ m × 9.8 μ m

15.734 kHz

59.94 Hz

570 TV lines

400 lx, F8

400 lx, F11

(γ= ON, 0 dB)

0.3 lx

0.2 lx

(F1.4, AGC ON)

60 dB

1/100 sec to 1/10,000 sec

1/4 sec to 1/10,000 sec

2.1 W

2.0 W

44 (W) × 29 (H) × 57.5 (D) mm (not including projecting parts)

105 g

110 g

10 G (20 Hz to 200 Hz 20 minutes for each direction–x, y, z)

UL6500, FCC/ICES-003 : Class B, CE : EN61326, AS/NZ : EN61326

Location and Function of Parts and Controls

1 Lens mount (C-mount)

Attach any C-mount lens or other optical equipment.

Note

The lens must not project more than 10 mm from the lens mount.

2 Reference holes (at the top)

These precision screw holes are for locking the camera module.

Locking the camera module using these holes secures the optical

axis alignment.

3 Reference screw holes/Tripod screw holes (at the bottom)

These precision screw holes are for locking the camera module.

Locking the camera module using these holes secures the optical

axis alignment.

You can install the camera on a tripod. To install on a tripod,

you will need to install the VCT-ST70I tripod adaptor using the

reference holes on the bottom of the camera.

XC-ST30

XC-ST70CE XC-ST50CE XC-ST51CE XC-ST30CE

1/3-type IT CCD 2/3-type IT CCD

6.35 μ m × 7.4 μ m 11.6 μ m × 11.2 μ m

C mount

Internal/External

HD/VD (HD/VD level: 2 V to 5 Vp-p)

±1% (in horizontal sync frequency), VS

less than ± 20 nsec (external horizontal frequency)

2:1 Interlaced

1.0 Vp-p, negative, 75 Ω unbalanced

400 lx, F5.6

400 lx, F8

(γ= ON, 0 dB)

0.3 lx

(F1.4, AGC ON)

56 dB

AGC/Fixed/Manual (adjustable on the rear panel)

ON/OFF (adjustable on the rear panel)

DC 12 V (10.5 V to 15 V)

1.9 W

2.1 W

105 g

−5˚C to +45˚C / 20% to 80% (no condensation)

−30˚C to +60˚C / 20% to 95% (no condensation)

0˚C to 40˚C

70 G

70,600 hours (Approx. 8.1 years)

Lens mount cap (1), Operating instructions (1)

XC-ST70/ST70CE/ST50/ST50CE/ST51/ST51CE/ST30/ST30CE

1 Lens mount (C-mount)

2 Reference holes

3 Reference screw holes/

Tripod screw holes

Lens mount shoulder

10 mm or less

1/2-type IT CCD

1/3-type IT CCD

CCIR

752 × 582

736 × 575

8.6 μ m × 8.3 μ m

6.5 μ m × 6.25 μ m

15.625 kHz

50 Hz

560 TV lines

400 lx, F11

400 lx, F5.6

(γ= ON, 0 dB)

0.2 lx

(F1.4, AGC ON)

58 dB

1/120 sec to 1/10,000 sec

1/4 sec to 1/8,000 sec

2.0 W

110 g

0.3 lx

54 dB

1.9 W