Sony XCL-CG510C Technisches Handbuch - Seite 27

Blättern Sie online oder laden Sie pdf Technisches Handbuch für Digitalkamera Sony XCL-CG510C herunter. Sony XCL-CG510C 48 Seiten. Digital video camera module

Seite drucken

White Balance

The white balance can be automatically adjusted once
when the WHITEBALANCE-AUTO command is
executed. The detection area is set to the screen center
by default. The detection area can also be displayed on
the screen. The detection frame can be changed
arbitrarily (AWB-FRAME). For manual correction, the
FINE command should be executed. The white balance
can be set finely per sensor tap. Therefore, a fine
adjustment should be made if the color difference
between sensor taps cannot be adjusted completely by
AWB.
Command
Parameter
WHITEBALANCE-
0
AUTO (AWB)
1
AWB-FRAME-
0
HIGHLIGHT
1
Command
RGAIN-FINE
256 (×1) to 4095
GGAIN-FINE
256 (×1) to 4095
BGAIN-FINE
256 (×1) to 4095

LUT

Five types of presets are provided. Specify using a 12 bit
value. Binarization, 5-point interpolation, and arbitrary
setting can be changed.
Command
Parameter
LUT-FORMAT
0
1
2
3
4
1. LUT off
4. 5-point

5. Arbitrary setting

interpolation
Setting
Manual correction
One-push AWB
Detection frame is hidden
Detection frame is
displayed
Parameter
Setting
Red gain
Green gain
Blue gain
Setting
LUT off (γ=1)
Reverse

Binarization

5-point interpolation

Arbitrary setting
2. Reverse
3. Binarization
Binarization
The binarization threshold can be changed.
Command
BINARIZATION
5-point interpolation
The values of output points 1 through 5 that correspond
to input points 1 through 5 can be changed. Linear
interpolation is performed between interpolation points.
Command
Parameter1 Parameter2 Parameter3
LINEAR-
INTERPOLATION
Setting example:
Output
>LINEAR-INTERPOLATION 1 240 200
>LINEAR-INTERPOLATION 2 900 400
>LINEAR-INTERPOLATION 3 2047 3000
>LINEAR-INTERPOLATION 4 3000 3200
>LINEAR-INTERPOLATION 5 3800 3900
>LINEAR-INTERPOLATION-BUILD
>LUT-FORMAT 3
Arbitrary setting
The output values 0 through 4095 that correspond to
input values 0 through 4095 can be changed.
Command
Parameter1
LUT
0 to 4095
Setting example:
>LUT 0 3
>LUT 1 10
>LUT 2 20
...
>LUT 4094 4000
>LUT 4095 4010
>LUT-FORMAT 4
27
Parameter
0 to 2047 to 4095
1 to 5
0 to 4095
0 to 4095
Input
Parameter2
0 to 4095