Sony 4548736019614 Betriebsanleitung - Seite 25

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Stereo System Sony 4548736019614 herunter. Sony 4548736019614 40 Seiten.

Seite drucken

Additional information

Setting the

automatic standby

function

The system enters standby mode

automatically in about 15 minutes when

there is no operation or audio signal output

(automatic standby function).

By default, the automatic standby function

is turned on.

Press /  to turn on the

system.

Press and hold /  for more

than 3 seconds.

After "AUTO STANDBY OFF"

(automatic standby function is

off) or "AUTO STANDBY ON"

(automatic standby function is

on) appears, release the buttons.

Tip

• When the system enters standby mode,

"STANDBY" appears and blinks 8 times on the

display  .

Note

• The system may not enter standby mode

automatically in the following cases:

– while using the tuner function

– while an audio signal is being detected

– during playback of audio tracks or files

– while the Play Timer or Sleep Timer is being

used

• The system resets the 15 minute countdown time

for entering standby mode in the following cases:

– when a USB device is connected in USB

function

– when a button on the remote or unit is pressed

Setting the

BLUETOOTH standby

mode

When BLUETOOTH standby mode is enabled,

the system enters wait mode for BLUETOOTH

connection even when the system is turned

off. This mode is disabled by default.

Press BLUETOOTH MENU  .

Press  /   to select "BT: STBY,"

 .

then press

Press  /   to select "ON" or

"OFF," then press

Press /  to turn off the

system.

Once the system is off, the

(BLUETOOTH) indicator flashes slowly.

Tip

• When this mode is set to "ON," the system turns

on automatically and you can listen to music

by making a BLUETOOTH connection from a

BLUETOOTH device.

• Disabling the BLUETOOTH standby mode reduces

power consumption in standby mode.

Note

• When the system has no pairing information,

this mode is not available. To use this mode, the

system needs to be connected to the device and

has its pairing information.

 .