Sony 4548736019614 Betriebsanleitung - Seite 29

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Stereo System Sony 4548736019614 herunter. Sony 4548736019614 40 Seiten.

Seite drucken

Troubleshooting

If a problem occurs while operating the

system, follow the steps described below

before consulting your nearest Sony dealer.

If an error message appears, be sure to make

a note of the contents for reference.

Check to see if the problem is listed

in this "Troubleshooting" section.

Check the following customer

support websites.

For customers in Europe:

http://www.sony.eu/support

For customers in Latin America:

http://esupport.sony.com/LA

For customers in other countries/

regions:

http://www.sony-asia.com/support

You will find the latest support

information and a FAQ at these

websites.

If, after steps 1 and 2, you still

cannot solve the problem, consult

your nearest Sony dealer.

When bringing the product in for

repairs, be sure to bring in the entire

system (main unit, speakers and remote

control).

This product is a system product, and

the entire system is needed to

determine the section requiring repair.

If "PROTECT" appears on the display 

Immediately unplug the power cord, and

check the following items after "PROTECT"

disappears.

• Make sure that the + and – speaker

cords are not short circuited.

• Make sure that nothing is blocking the

ventilation holes of the system.

After you have checked these above

items and found no problems, reconnect

the power cord, and turn on the system.

If the issue persists, contact your nearest

Sony dealer.

General

The system does not turn on.

Make sure you have connected the power cord

to a wall outlet correctly.

The system has entered standby mode

unexpectedly.

This is not a malfunction. The system enters

standby mode automatically in about 15

minutes when there is no operation or audio

signal output. See "Setting the automatic

standby function" (page 25).

The clock setting or the Play Timer operation

has been canceled unexpectedly.

If about a minute elapses with no operation,

the clock setting or Play Timer setting is

canceled automatically. Perform the operation

again from the beginning.

There is no sound.

Are the + and – speaker cords short-circuited?

Are you using only the supplied speakers?

Is anything blocking the ventilation holes of

the system?

Turn up the volume on the unit.

Make sure an external component is

connected correctly to the AUDIO IN jack 

and set the function to AUDIO IN.

The specified station may have temporarily

stopped broadcast.

Sound comes from one channel, or the left

and right volumes are unbalanced.

Place the speakers as symmetrically as

possible.

Connect only the supplied speakers.

Severe hum or noise occurs.

Move the system away from sources of noise.

Connect the system to a different wall outlet.

Use of an AC power tap with a noise filter (not

supplied) is recommended.