Sony BDV-N890W Schnellstart-Handbuch - Seite 16

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Stereo System Sony BDV-N890W herunter. Sony BDV-N890W 20 Seiten. Blu-ray disc/dvd home theatre system
Auch für Sony BDV-N890W: Handbuch zur Schnelleinrichtung (2 seiten), Referenzhandbuch (33 seiten), Referenzhandbuch (42 seiten), Spezifikationen (5 seiten), Spezifikationen (4 seiten), Eingeschränkte Garantie (1 seiten), Schnellstart-Handbuch (2 seiten), Installationshandbuch für Lautsprecher (2 seiten), Handbuch zur Schnelleinrichtung (2 seiten), Handbuch zur Schnelleinrichtung (2 seiten), Handbuch zur Schnelleinrichtung (2 seiten), Schnellstart-Handbuch (1 seiten), Installationshandbuch (2 seiten), Service-Handbuch (4 seiten)

Seite drucken

Troubleshooting

If you experience any of the following difficulties while using

the system, use this troubleshooting guide to help remedy the

problem before requesting repairs.

Also consult the Operating Instructions on the following website:

http://support.sony-europe.com/

The power does not turn on.

Check that the AC power cord (mains lead) is securely

connected to the wall outlet (mains).

The system does not work normally.

Disconnect the AC power cord (mains lead) from the wall

outlet (mains), then reconnect after several minutes.

The system does not output sound of the TV program when

connected to a set-top box.

Check the connections.

Select the correct input of the system to which the set-top box

is connected.

There is no sound or wireless transmission is not activated.

Check the status of the LINK/STANDBY indicator on the

surround amplifier.

Turns off.

ē Check that the AC power cord (mains lead) of the surround

amplifier is connected securely.

ē Turn the surround amplifier on by pressing / on the

surround amplifier.

Flashes green quickly.

ē  Press / on the surround amplifier.  Insert the

wireless transceiver into the surround amplifier correctly.

 Press / on the surround amplifier.

Flashes red.

ē Press / to turn off the surround amplifier, and check the

following items.

 Are the + and – speaker cords short-circuited?

 Is anything blocking the ventilation opening of the

surround amplifier?

After checking the above items and fixing any

problems, turn on the surround amplifier. If the cause

of the problem cannot be found even after checking all

the above items, consult your nearest Sony dealer.

Flashes green or orange slowly or turns red.

ē Make sure that the wireless transceiver is inserted correctly

into the main unit.

ē Sound transmission is poor. Move the surround amplifier

so that the LINK/STANDBY indicator turns green or orange.

ē Move the system away from other wireless devices.

ē Avoid using any other wireless devices.

Turns green or orange.

ē Check the speaker connections.

A disc does not play.

The region code of the disc does not match the system.

Moisture has condensed on the lenses inside the main unit.

Remove the disc and leave the main unit turned on for about

half an hour.

The disc is not correctly finalized.