Display
Image
To set various display images.
- "SpaceProducer" (e): to create animated on-
screen patterns in time with the music.
- "off': to not display any image.
- "All": to step repeatedly through the display
images in all display modes.
- "SA 1 - 5": to display the Spectrum Analyzer.
- "Movie
1 -
3": to display a movie.
- "Wallpaper I - 3": to display a wallpaper.
- "SA All"/"Movie All"/"Wallpaper All": to
step repeatedly through the display images of
each mode.
Info (Information)
To display the items (depending on the source,
etc.).
- "All": to display all items.
- "Simple"
(e):
to not display any items.
- "Clear": to have items automatically
disappear.
Demo*' (Demonstration)
To set "on"
(e)
or "off."
Dimmer
To change the brightness of the display.
- "Auto"
(e):
to dim the display automatically
when you tum lights on.
- "on": to dim the display.
- "off': to deactivate the dimmer.
Auto Scroll
To scroll long displayed item automatically
when the disc/albumlgroup/track is changed.
- "on": to scroll.
- "off'
(e):
to not scroll.
Receive Mode
Local (Local seek mode)
- "off'
(e):
to tune normal reception.
- "on": to only tune into stations with stronger
signals.
Mono (Monaural mode)
To improve poor PM reception, select monaural
reception mode.
- "off'
(e):
to hear stereo broadcast in stereo.
- "on": to hear stereo broadcasts in monaural.
IF
- "Auto" (e): to automatically narrow the
reception frequency to eliminate noise.
- "Wide"*2: to always hear PM stereo
broadcasts in stereo and with full frequency
reception.
BTM (page 12)
Sound
EQ3 Preset
To select an equalizer type: "Xplod," "Vocal,"
"Edge," "Cruise," "Space," "Gravity," "Custom"
or "Off'
(e).
EQ3 Tune
See "Customizing the equalizer curve" on
page 19.
DSO
To select the DSO mode:
"1," "2,"
"3" or "off'
(e).
The larger the number, the more enhanced
the effect.
Balance
To adjust the balance between the right and left
speakers: "R 10" - "±O"
(e) -
"L 10"
Fader
To adjust the balance between the front and rear
speakers: "FlO" - "±O"
(e) -
"RIO"
Subwoofer
To adjust the subwoofer volume:
"+
10" - "±O"
(e) -
"-10"
("- 00"
is displayed at the lowest setting.)
•
LPF (Low Pass Filter)
To select the subwoofer cut-off frequency: "off'
(e), "125Hz" or "78Hz."
AUX Level
To adjust the volume level for each connected
auxiliary equipment. This setting negates the
need to adjust the volume level between sources
(page
21).
Adjustable level: "+6 dB" - "±O dB"
(e)-
"-6
dB"
*
I When the unit is turned off.
*2 In such cases, some FM stereo broadcasts may
become monaural while in the stereo reception
mode.
Customizing the equalizer curve
- EQ3Tune
"Custom" of EQ3 allows you to make your own
equalizer settings.
1
Select a source, then press
(MENU).
2
Select "Sound" ~ "EQ3 Preset" ~
"Custom;' using the joystick.
3
Select "EQ3 Tune" using the joystick.
4
Select the desired frequency range
from "LOW," "MID" and "HI."
continue to next page-+
19
Seite drucken