Argo Fanny black plus Betriebsanleitung - Seite 4

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Fan Argo Fanny black plus herunter. Argo Fanny black plus 6 Seiten. Desk and stand fan

Set the height of stand fan by means of height adjustment ring (13).

Insert the rear grill (6) on the motor shaft (7) in the proper position (hanlde upward).

Screw the nut (5) in order to fasten the rear grill firmly.

Set the blade (4) on the motor shaft (7).

Tighten the nut (2) on the motor shaft (caution - counterclockwise direction).

With the aid of the ring (3) join front and rear grill and tighten the screw on the ring.

The appliance does not need to be installed.

Position the unit on a flat, stable surface.

Connect the power cord to a suitable power socket (220-240V~).

Do not use this fan in an area with high humidity, rich of dust or water.

Tilt adjustment: to regulate the air flow upward or downward, push gently the motor housing and adjust the angle of

inclination with respect to the neck.

Press ON on the control panel or remote control.

A sound will indicate that the appliance is on and the digital display shows the MODE NORMAL. Fan speed is low.

The fan can be switched off using the OFF button.

This fan can be used both as a fan, with 3 modes (Normal, Natural and Sleep) and 3 fan speed options (low, medium

and high).

SPEED DISPLAY

Fan speed

display

low/med/high

BUTTON ON/OFF/SPEED

Touching the ON/OFF button

the appliance begins to

operate at low speed.

Rotate it to increase speed.

To switch off the fan press

the button again.

V 2/13

HOW TO USE THE APPLIANCE

CONTROL PANEL AND AVAILABLE FUNCTIONS

MODE DISPLAY

Fan mode display

Normal

Natural

Sleep

TIMER ON/OFF DISPLAY

TIMER DISPLAY from 0,5 to 7,5 h

SWING BUTTON